Mitsubishi ECLIPSE Owner's Manual page 301

Comfort controls
Cooling
For ordinary cooling
5
1. Set the mode selection dial to the "
2. Set the air selection switch (A) to the outside position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the control dial clock-
wise or counterclockwise.
5. Select the desired blower speed.
5-10
NOTE
N00731200177
For quick cooling
" position.
1. Set the mode selection dial to the "
2. Set the temperature control dial to the "MAX A/C" posi-
3. Set the blower speed to the highest position.
If the outside air is dusty or contaminated in some way, set
the air selection switch (A) to the recirculation position.
Let in some outside air from time to time for good ventila-
tion.
To cool the leg areas, set the mode selection dial to the
" " position.
tion.
" position.