Mitsubishi ECLIPSE Owner's Manual page 294

Changing the mode selection
To change the position and amount of air flowing from the
vents, turn the mode selection dial. (Refer to "Mode selection
dial" on page 5-7, 5-17.)
These symbols are used in the next several illustrations to dem-
onstrate the quantity of air coming from the vents.
: Small amount of air from the vents
: Medium amount of air from the vents
: Large amount of air from the vents
Face position
Air flows only to the upper part of the passenger compartment.
Foot/Face position
Air flows to the upper part of the passenger compartment, and
N00736400451
flows to the leg area.
NOTE
With the mode selection dial between the "
positions, air flows mainly to the upper part of the passen-
ger compartment. With the mode selection dial between
the " " and "
area.
Comfort controls
" and "
" positions, air flows mainly to the leg
5
"
5-3