How To Change A Tire - Mitsubishi ECLIPSE Owner's Manual

Jack
Before removing the jack, lift up the luggage floor board.
1-To remove
Turn the shaft end so that the jack contracts, then remove it
from the storage bracket (A).
2-To store
Turn the shaft end by hand to expand the jack until it is held
firmly in position.
N00832700109
Before changing a tire, first stop your vehicle in a safe, flat
location.
1. Park the vehicle on level and stable ground.
2. Set the parking brake firmly.
3. On vehicles with manual transaxle, turn the ignition key
to the "LOCK" position, then move the gearshift lever to
the "R" (Reverse) position.
On vehicles with automatic transaxle, move the selector
lever to the "P" (PARK) position, then turn the ignition
key to the "LOCK" position.
4. Turn on the hazard flashers and set up a warning triangle,
flashing signal light, etc., at an adequate distance from the
vehicle, and have all your passengers leave the vehicle.

How to change a tire

For emergencies
N00836900721
6
6-9