Mitsubishi ECLIPSE Owner's Manual page 183

Features and controls
NOTE
Using the ASC OFF switch turns off both the skid control
function and the traction control function.
When moving out of mud, sand or fresh snow, pressing
the accelerator pedal may not allow the engine speed to
increase. In such situations, temporarily deactivate the
ASC, using the ASC OFF switch.
If you continue to press the ASC OFF switch after the
ASC is turned off, the "mistaken operation protection
function" will activate and the ASC will turn back on.
After the "mistaken operation protection function" is acti-
vated, it will not be possible to turn the ASC off.
To turn the system off again, return the ignition key to the
3
"ACC" or "LOCK" position, restart the engine and press
the ASC OFF switch.
3-88
ASC indicator, ASC OFF indicator
The indicators should illuminate when the ignition key is
turned to the "ON" position, and should turn off after a few
seconds.
If the indicator stays on or does not illuminate when the igni-
tion key is turned to the "ON" position, have the vehicle
inspected by an authorized Mitsubishi Motors dealer or a repair
facility of your choice as soon as possible.
indicator blinks when the ASC is operating.
indicator is illuminated when the ASC is deactivated.
N00546900011