Kyocera FS-C2026MFP Operation Manual page 360

Adjust/Maint.:
Copy Denst. Adj.
1
*********************
Send/Box Density
2
AutoColorCorrect
3
Correct. Bk Line: a b
1 *Off
*********************
On(Low)
2
On(High)
3
LaserScanner Cln (Laser scanner cleaning mode setting)
This sets the cleaning mode for the laser scanner. When the printing quality declines, cleaning the laser scanner
can restore the printing quality.
Use the procedure below to set the laser scanner cleaning mode setting.
Sys. Menu/Count.:a b
Document Box
;
Edit Destination
<
Adjust/Maint.
=
*********************
Adjust/Maint.:
Copy Denst. Adj.
1
*********************
Send/Box Density
2
AutoColorCorrect
3
2
a b
[ Exit ]
3
4
5
6
1
[ Exit ]
2
a b
[ Exit ]
3
8-112
Default Setting (System Menu)
Press the OK key. The Adjust/Maint. menu
appears.
Press the or key to select [Correct. Bk Line].
Press the OK key. Correct. Bk Line appears.
Press the or key to select [Off], [On(Low)] or
[On(High)].
Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
In the Sys. Menu/Count. menu, press the
key to select [Adjust/Maint.].
Press the OK key. The Adjust/Maint. menu
appears.
Press the or key to select [Service Setting].
or