Kyocera FS-C2026MFP Operation Manual page 121

Two-sided to Two-sided
Original
The paper sizes supported in Two-sided to Two-sided are Legal, Letter, Oficio II, Executive, A4, B5,
NOTE:
A5 and Folio.
The procedure for using two-sided/duplex copying is explained below.
Function Menu:
Paper Selection g
1
*********************
Collate
2
Duplex
3
Duplex:
1 *1-sided>>1-sided
*********************
1-sided>>2-sided
2
2-sided>>1-sided
3
Finish. Binding: a b
1 *o Left/Right
*********************
p Top
2
•
•
Produces two-sided copies from two-sided originals.
The document processor is required.
Copy
1
a b
T
T
[ Exit ]
2
3
a b
4
3-17
Binding Left/Right: Images on the second sides
are not rotated.
Binding Top: Images on the second sides are
rotated 180°.
Press the Function Menu key. Function Menu
appears.
Press the or key to select [Duplex].
Press the OK key. Duplex appears.
Press the or key to select the desired duplex
copying mode.
If you select [1-sided>>2-sided], press [Detail] (the
Right Select key) and you can select the binding
edge of the finished copies and the original setting
orientation.
Basic Operation
3