Quick Copy - Kyocera FS-C2026MFP Operation Manual

Copies:
Quick Copy mode
This mode is used to print an additional copy of a document that has already been printed. If a document is
printed with Quick Copy selected in the printer driver, the document will be simultaneously stored on the RAM
disk. The required number of copies can be printed whenever needed from the operation panel. If more
documents than the set maximum are stored, the oldest job will be overwritten each time a new job is stored.
When the machine power is turned off, jobs stored in this mode are erased. For the number of documents that
can be stored in Quick Copy mode, see Quick Copy Jobs on page 8-76.
Document Box:
USB Memory
1
*********************
Polling Box
2
Job Box
3
Job Box:
Private
1
*********************

Quick Copy

2
Quick Copy:
l Fiala
*********************
l Maury
a b
(1 - 999,---)
---
******** copies
a b
a b
a b
The number of copies screen appears. Set the
12
number of copies and press the OK key.
The file print confirmation screen appears. Press
13
[Yes] (the Left Select key). Accepted appears and
printing begins.
Press the Document Box key. The Document Box
1
menu appears.
Press the or
2
Press the OK key. The Job Box menu appears.
3
Press the or
4
Press the OK key. The user selection menu
5
appears.
Press the or
6
6-10
Document Box
key to select [Job Box].
key to select [Quick Copy].
key to select the user.