Kyocera FS-C2026MFP Operation Manual page 359

Correct. Bk Line
Correct fine black lines (black streaks caused by contamination), which may appear on the copies, when the
document processor is used.
The table below shows the available settings.
Off
On(Low)
On(High)
Using Correcting Fine Black Line can impair reproduction of fine characters. It is recommended to
NOTE:
keep the default ([Off]).
Use the procedure below to specify the setting for correcting fine black lines.
Sys. Menu/Count.:a b
Document Box
;
Edit Destination
<
Adjust/Maint.
=
*********************
K
Paper feed
direction
Item
No correction performed.
Correction performed. The reproduction of
the image becomes lower when using Off.
Correction performed. Select this item if
black streak remains after using On (Low).
The reproduction of the image becomes
lower when using On (Low).
[ Exit ]
8-111
Default Setting (System Menu)
Description
In the Sys. Menu/Count. menu, press the
1
key to select [Adjust/Maint.].
8
or