Security Level - Kyocera FS-C2026MFP Operation Manual

NetWare Setup
Select the NetWare network connection. After that, select frame types for NetWare network from Auto,
Ethernet-II, 802.3, 802.2, or SNAP. The default settings is "Off".
Use the procedure below to setup the NetWare setting.
Sys. Menu/Count.:a b
Report
1
Counter
2
System
3
*********************
Login User Name: L b
*******************
Login Password:
System:
Network Setting
1
*********************
I/F Block Set.
2

Security Level

3
Network Setting: a b
TCP/IP Settings
1
*********************
NetWare
2
AppleTalk
3
NetWare:
1 *Off
*********************
On
2
1
[ Exit ]
[ Login ]
2
a b
[ Exit ]
3
4
[ Exit ]
5
6
a b
7
8-152
Default Setting (System Menu)
In the Sys. Menu/Count. menu, press the
key to select [System], and press the OK key.
When you are performing user management and
have not logged in, a login screen will appear.
Then, enter the Login User Name and Login
Password to log in, and press [Login] (the Right
Select key).
The System menu appears.
Press the or key to select [Network Setting].
Press the OK key. The Network Setting menu
appears.
Press the or key to select [NetWare].
Press the OK key. NetWare appears.
Press the or key to select [On] or [Off].
or