Software/Driver Configuration And Fine-Tuning; Adapter Configuration - Chelsio T5 Installation And User Manual

Chapter IV. NDIS SR-IOV

2. Software/Driver Configuration and Fine-tuning

Please ensure that Unified Wire is installed on the host before proceeding. Refer
Software/Driver Installation
instructions.
Check if the machine is SR-IOV capable using the following command:
PS C:\Users\Administrator> Get-VMHost | fl *iov*
The IovSupport field should display "True" as shown in the image below:
2.1.

Adapter Configuration

The adapter's configuration should be updated to make use of the SR-IOV feature. You can do
this by running the chelsio_adapter_config.ps1 configuration script. The script will be present in
ChelsioUwire-x.x.x.xx\Adapter Configuration\. Open PowerShell with administrative privileges
and follow the steps mentioned below:
i. Change your working directory to ChelsioUwire-x.x.x.xx\Adapter Configuration\
ii. Run the adapter configuration script and enter the index of the adapter for which the
configuration needs to be updated:
PS D:\ChelsioUwire-x.x.x.xx\Adapter Configuration>
.\chelsio_adapter_config.ps1
Chelsio T5/T4 Unified Wire for Windows
section of the Chelsio Unified Wire chapter for step-by-step
75