Chapter V. Unified Wire Manager (UM)
8.8.8. Bypass (Linux)
You can use the Bypass page to configure various settings for Chelsio's bypass adapters like
setting bypass operation mode, creating rules (filters), starting/stopping BA server, etc. There
are two modules available: Bypass Configuration and Redirect Configuration.
Bypass Configuration
In the Bypass Configuration module, you can view the status and start/stop the BA server
accordingly. The adapter will redirect packets using the mode speciffied in the Default bypass
mode field unless otherwise specified in the Current bypass mode.
The Watchdog timer is used to ensure that if there is a software failure, the switch will enter the
default state. The Watchdog timeout value should be provided in milliseconds.
Figure 8.8.8 (a) - Bypass Configuration module
Chelsio T5/T4 Unified Wire for Windows
185
Need help?
Do you have a question about the T5 and is the answer not in the manual?
Questions and answers