Chelsio T5 Installation And User Manual page 62

Chapter II. NDIS Function
NetworkDirect Interrupt Moderation

Description: Control the interrupts generated during NDK traffic.

Value: Disabled | Enabled

Default: Enabled
For more information, refer
us/library/windows/hardware/ff556017%28v=vs.85%29.aspx
Nvgre Task Offload
o Description: Enable or disable offloading processing of NVGRE encapsulated frames.
o Value: Disabled | Enabled
o Default: Enabled
Packet Direct
o Description: Enable or disable PacketDirect feature.
o Value: Disabled | Enabled
o Default: Enabled
Receive Side Scaling (RSS)

Description: Control the RSS functions. If on, the Microsoft RSS function is enabled. If
off, the Chelsio RSS function is enabled.

Value: Disabled | Enabled

Default: Enabled
Recv Segment Coalescing (IPv4)

Description: Enable or disable the Receive Segment Coalescing feature for IPv4 traffic.
This is a receiver packets aggregating feature which helps reduce the receive host CPU
load and improve throughput in a 40/10Gb network environment where CPU can be the
bottleneck.

Value: Disabled | Enabled

Default: Enabled
Recv Segment Coalescing (IPv6)

Description: Enable or disable the Receive Segment Coalescing feature for IPv6 traffic.
This is a receiver packets aggregating feature which helps reduce the receive host CPU
load and improve throughput in a 40/10Gb network environment where CPU can be the
bottleneck.

Value: Disabled | Enabled

Default: Enabled
RSS Base processor

Description: Specify the number of the base RSS processors.

Value: 0-16

Default: 1
Chelsio T5/T4 Unified Wire for Windows
http://msdn.microsoft.com/en-
62