Software/Driver Uninstallation; Manual Uninstallation - Chelsio T5 Installation And User Manual

Chapter I. Chelsio Unified Wire

6. Software/Driver Uninstallation

Chelsio Unified Wire can be uninstalled using any of the following methods:
a. Chelsio's Unified Wire Installer
b. Manual Uninstallation
6.1.

Manual Uninstallation

The driver components need to be uninstalled in the order described here :
6.1.1. NDIS Miniport driver
1. Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the Network Adapters, right click on the Chelsio Network Adapter
and select Uninstall.
Note
In case of Virtual Functions in VM, use Chelsio VF Network Adapter.
2. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
3. Repeat the above step for the other Chelsio Network Adapters.
6.1.2. Virtual Bus Driver
1. Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the System Devices, right click on the Chelsio T5/T4 40G/10G Bus
Enumerator and select Uninstall.
Note
In case of Virtual Functions in VM, use Chelsio T5/T4 40G/10G Bus
Enumerator [Virtual Function].
2. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
6.1.3. Generic Function
1. Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the Network Adapters, right click on the Chelsio T5/T4 40G/10G
Generic Function and select Uninstall.
2. Select the Delete the driver software for this device checkbox when Confirm Device
Uninstall is prompted and click OK.
Chelsio T5/T4 Unified Wire for Windows 54