Chelsio T5 Installation And User Manual page 12

Chapter I. Chelsio Unified Wire
2. Select Browse my computer for driver software.
3. Select Let me pick from a list of device drivers on my computer.
4. Click on Have Disk Button and on the next screen browse for chnetx64.inf file and click
Open and then OK
5. Click Next and driver installation will progress. Click Finish once the installation is
complete.
6. Repeat the above steps for the other Chelsio Network Adapters.
3.1.3. Generic Function
1. Open the Device Manager (Control Panel -> System & Security-> System -> Device
Manager), click on the Network Adapters, right click on the Chelsio T5/T4 40G/10G
Generic Function and select Update Driver Software.
2. Select Browse my computer for driver software.
3. Select Let me pick from a list of device drivers on my computer.
4. Click on Have Disk Button and on the next screen browse for chnullx64.inf file and
click Open and then OK
5. Click Next and driver installation will progress. Click Finish once the installation is
complete.
Installing drivers using any other order is not supported.
Important
Chelsio T5/T4 Unified Wire for Windows 12