Chelsio T5 Installation And User Manual page 157

Chapter V. Unified Wire Manager (UM)
Discover targets
iSCSI targets can be discovered by providing the IP address and TCP port (usually 3260) of the
target. The discovery operation fetches the targets found at that Portal (combination of IP
address and TCP port). The discovery operation also fetches all the other Portals that the
target(s) are listening on. The discovered target can be deleted if required. Please note that all
the Portals that the target sent are listed. The delete operation will not work on all the portals,
only on the original discovery portal (the IP address and TCP Port specified when discovering
the target).
If there are any pre-existing iSCSI sessions established to the target, deletion of
Note
the target Portal from the discovered targets list will fail.
Chelsio T5/T4 Unified Wire for Windows
Figure 8.7.2 (d) - Discover targets module
157