Voice Features; Handset And Speaker; Abbreviated Dialing (Ad) - AT&T 7407 User Manual

Handset and Speaker

When placing calls or using the voice features, you have the option of doing so
off-hook (by lifting the handset) or on-hook (by pressing [
terminal is set for the Speakerphone feature, pressing [
activates the built-in microphone so that you can place and answer calls without
lifting the handset.

Abbreviated Dialing (AD)

To program/reprogram an
AD button
Note: AD buttons must
first be assigned by
System Manager.
To place an AD call

Voice Features

On a separate sheet of paper, jot down the outside
1
numbers, extensions, and/or feature codes you want
to program.
Note: Each AD button will hold one complete phone
number or feature code.
2 Pick up handset
Note: If you are using the built-in speakerphone, you
must press a call appearance button before you
proceed to Step 3.
3 Press [
Program
or Dial AD Program code
Press [
4
AD xxxxxx
5 Dial outside number, extension, or feature code you
want to store (up to 24 digits)
Press [ ] or [
6
#
Repeat Steps 4-6 to program additional buttons
Hang up or press [
7
1 Press selected [
Call is dialed (silently)
Speaker
] simultaneously
Speaker
]
] to be programmed
] you are programming
AD xxxxx
] to end programming
Drop Test
]
AD xxxxx
] ). If your voice
[dial tone]
[dial tone]
[dial tone]
[confirmation tone]
[ringback tone]
11