Equipment Features - AT&T MLS-34D Manual

Equipment Feature
Do Not Disturb
Prevents any calls from ringing at your
phone. Intercom calls get a busy signal;
other callers hear the usual ringing.
Recommended only if someone else
answers your calls. [
be programmed on a button with lights.
Exclusive Hold
Places a call on hold so other extensions
with the line cannot pick it up.
Recall
"Recalls" a dial tone to use Centrex
features while on a call. (Disconnects an
intercom call.)
Save Number Redial
Saves the last number dialed (usually a
busy or non-answering call). You can
redial it at any time; the number stays in
memory until a new one is saved. System
Speed Dial numbers cannot be saved.
Last Number Redial
Redials the last number dialed. (You
cannot redial a System Speed Dial.)
Privacy
Prevents other people from joining your
call [ ] [ ] [
Feature 0 7
on a button with lights.
Touch-Tone Enable
Changes dialing for a rotary phone to
touch tones for the duration of a call.
Group Pickup
Picks up a call ringing at any extension in
the Pickup Group.*
Group Calling
Places a ringing intercom call to all
extensions in a Calling Group* simulta-
neously. You are connected to the first
extension that answers.
Group Paging
Places a voice paging intercom call to all
extensions in a Calling Group* simulta-
neously. You are connected to the first
extension that answers.
Loudspeaker Paging
Connects you to the (optional) loud-
speaker paging system.
Can use this feature only if programmed onto a button with lights (see panel 4).
*
Calling Group and Pickup Group extensions are listed on a separate form. See your System
Manager for a copy of the lists.

Equipment Features

You cant use an equipment feature in either of two ways:
Dial it manually (except for Do Not Disturb and Privacy,
which require programming on buttons with lights).
Press a button programmed with the feature (see
"Programming" on panel 4).
] [ ] [ ] must
Feature 0 1
] must be programmed
To Dial
Manually
Not available
Dial [ ] [ ] [
Feature 0
Dial [ ] [ ] [
Feature 0
Dial [ ] [ ] [
Feature 0
before hanging up
To redial later, press
[ ] [ ] [ ] again
Feature 0 4
Dial [ ] [ ] [
Feature 0
Not available
Dial [ ] [ ] [
Feature 0
Dial [ ] [ ] [
Intercom 6
+ Group Number (1–4)
Dial [ ] [ ]
Intercom 7
+ Group Number (1–4)
Dial [ ] [ ] [
Intercom
+ Group Number (1–4)
Dial [ ] [ ] [
Intercom 7
5
To Use On a
Button
Press the
button to turn on
and off
Press the button
]
2
Press the button
]
3
Press the button
]
4
before hanging up
To redial later, press
the button again
] Press the button
5
Press the
button to turn on
and off
Press the button
]
8
Press the button
]
6
Press the button
Press the button
]
7
Press the button
]
0