Conventions - AT&T 7407 User Manual

Conventions

The following conventions are used in the procedures:
Gray Type
[ ]
xxxxx
[ ] and
Feature
[ ]
Feature xxxxx
[feedback tone]
[ Display Information ]
For a list of glossary terms, see the section titled Key Words to Know.
Procedure steps in gray type are to be followed if you do
not have a button assigned for the feature.
A shaded box containing xxxxx represents any button
used exclusively for placing, receiving, or holding calls,
and labeled with an extension number (shown here as
). The button will have a red in-use light and a
XXXXX
green status light. Also known as a call appearance
button.
A shaded box containing a feature name represents any
button having a feature assigned to it, with a
corresponding feature name label, sometimes followed
by an extension number or a person's name (shown
here as ).
XXXXX
The tone that appears in brackets after a step indicates
what you should hear from your handset, or from the
speakerphone, if appropriate, after successfully performing
that step. For a list of tones and their meanings, see the
section titled Tones and Their Meanings.
A white box containing the information that appears on
your display screen.
9