The Back Panel - TP-Link Archer CR700 User Manual

Archer CR700

1.3.2 The Back Panel

RESET: There are two ways to reset the modem router's factory defaults.

Method one: With the modem router powered on, use a pin to press and hold the Reset
button for at least 8-10 seconds. And the modem router will reboot to its factory default
settings.
Method two: Restore the default setting from
router's Web-based Management.
WPS: The switch for the WPS function.

WiFi ON/OFF: The switch for the WiFi function. Press it to enable/disable the WiFi function.

USB2, USB1: The USB port connects to a USB storage device or a USB printer.

LAN4, LAN3, LAN2, LAN1: Through these ports, you can connect the modem router to your

PC or the other Ethernet network devices.
Cable: Through this port, you can connect the modem router to coaxial cable.

DC: The power plug where you will connect the power adapter.

Power ON/OFF: The switch for the power.

AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 1-2
"5.10.6 Backup &
6
Restore" of the modem