Guest Network - TP-Link Archer CR700 User Manual

Archer CR700
Enable Wireless Radio – Check the box to enable the Wireless Radio.

Name (SSID) – Create a name (up to 32 characters) for your 2.4GHz/5GHz wireless network.

The default SSID is set to be TP-LINK_XXXX for the wireless network of 2.4GHz and
TP-LINK_XXXX _5G for the wireless network of 5GHz.
Hide SSID – If you want to hide the SSID of your wireless network from the Wi-Fi network,

you should check the box.
Password –You can enter ASCII characters between 8 and 63 characters or 8 to 64

Hexadecimal characters. The default password is the same with the default PIN code, which
is labeled on the bottom of the modem router.
Click the Save button to save the settings.
4.4

Guest Network

Choose menu "Basic → Guest Network", and you will see the screen as shown below. This
feature allows you to create a separate network for your guests without allowing them to access
your main network and the computers connected to it.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 4-7
15