Backup & Restore - TP-Link Archer CR700 User Manual

Archer CR700
Time Settings:
Enable SNTP - The switch for SNTP function. If you turn on the switch, the field will become

green.
Current Time – Display the current time.

System Start Time – Display the system start time.

Time Server 1 / Time Server 2 / Time Server 3- Enter the address or domain of the Server 1

or Server 2, and then the modem router will get the time from the Server preferentially. In
addition, the modem router built-in some common Servers, so it can get time automatically
once it connects the Internet.
Time Zone - Select your local time zone from the pull down list.

Click Save button to save these settings.

Note:
1. This setting will be used for some time-based functions such as parental control and firewall.
You must specify your time zone once you login to the router successfully; otherwise, these
functions will not take effect.
2. The time will be lost if the router is turned off.
3. The router will automatically obtain GMT from the Internet if it is configured accordingly.
4. The Daylight Saving will take effect one minute after the configurations are completed.
5.10.6 Backup & Restore
Choose menu "Advanced→System Tools→Backup & Restore", and then you can save the
current configuration of the modem router as a backup file and restore the configuration via a
backup file as shown in the following figure.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-64
87