TP-Link Archer CR700 User Manual page 47

Archer CR700
2.4GHz Primary Network:
Name (SSID) – Create a name (up to 32 characters) for your 2.4GHz wireless network. The

default SSID is set to be TP-LINK_XXXX.
Hide SSID – If you want to hide the SSID of your wireless network from the Wi-Fi network,

you should check the box.
Security – There are four wireless security modes supported by the modem router: No

Security, WPA/WPA2 Personal (Recommended), WPA/WPA2 Enterprise, WEP. You can
choose one of them from the drop-down list.
1) No Security: If you do not want to use wireless security, choose No Security. But it's
recommended to use wireless security.
2) WPA-PSK/WPA2-PSK Personal(Recommended):
Version –You can choose the version of the WPA-PSK/WPA2-PSK security by selecting

Auto, WPA-PSK or WPA2-PSK. The default setting is WPA2-PSK.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-15
39