TP-Link Archer CR700 User Manual page 37

Archer CR700
IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.

Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP,

usually is 255.255.255.0.
Default Gateway - Enter the gateway IP address in dotted-decimal notation provided by your

ISP.
Primary DNS/ Secondary DNS - Here you can set DNS Server (at least one) manually. The

Route will use this DNS Server for priority.
Current used MAC Address - This field displays the current MAC address of the Internet

port.
MAC Clone - You can select one of below methods to change MAC address for this WAN

Interface depend on your needs. If you select Use this MAC Address, you can enter the
MAC Address you want to change.
Click the Apply button to save the settings.
3) L2TP(Dynamic IP)
Choose L2TP(Dynamic IP) in the drop-down list if your ISP provides L2TP(Dynamic IP)
information to you. You should set User name, Password and Server IP Address/Name in the
screen below.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-7
29