Page 2
Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. National Restrictions This device is intended for home and office use in all EU countries (and other countries following the EU directive 1999/5/EC) without any limitation except for the countries mentioned below: Country Restriction...
Cet appareil numérique de la Classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Korea Warning Statements: 당해 무선설비는 운용중 전파혼신 가능성이 있음. NCC Notice& BSMI Notice: 注意! 依據 低功率電波輻射性電機管理辦法 第十二條 經型式認證合格之低功率射頻電機, 非經許可, 公司、 商號或使用者均不得擅自變更頻率、 加大功率或變更原設計之特性或功能。...
Page 6
Avoid water and wet locations. This product can be used in the following countries:...
DECLARATION OF CONFORMITY For the following equipment: Product Description: AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router Model No.: Archer CR700 Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives:...
CONTENTS Package Contents ....................1 Chapter 1. Product Overview ................... 2 1.1 Overview of the Modem Router ..................2 1.2 Main Features ....................... 2 1.3 Panel Layout ......................... 4 1.3.1 The Front Panel ........................4 1.3.2 The Back Panel ........................6 Chapter 2.
The following contents should be found in your package: One Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router One Power Adapter for Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router Quick Installation Guide ...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Chapter 1. Product Overview Thank you for choosing the Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router. Overview of the Modem Router The Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router integrates DOCSIS 3.0 modem, NAT router, 4-port switch and wireless access point in one device provides a...
Page 13
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide network IPv6 supported, meeting the demands for the next generation of Internet Wi-Fi On/Off Button allows users to turn their wireless radio on or off ...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 1.3 Panel Layout 1.3.1 The Front Panel Figure 1-1 The modem router’s LEDs are located on the side panel (View from top to bottom). They indicate the device’s working status. For details, please refer to LED Explanation.
Page 15
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide (Power) The modem router is off. Please ensure that the power adapter is connected correctly. The modem router is synchronized to multiple downstream Orange channels. The modem router is synchronized to a single downstream White channel.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 1.3.2 The Back Panel Figure 1-2 RESET: There are two ways to reset the modem router's factory defaults. Method one: With the modem router powered on, use a pin to press and hold the Reset button for at least 8-10 seconds.
Step 4: Wait for two minutes. Make sure the following LEDs are on as indicated below. Power: Solid Downstream: Solid Upstream: Solid Online: Solid or Flashing Wireless: Solid Step 5: Contact your Internet Service Provider (ISP) to activate the Archer CR700 with the information below.
Page 18
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Step 6: Open a web browser and type in a valid URL, for example, http://www.tp-link.com, to test the Internet connection. Note: If the Internet is not accessible, please contact your ISP to make sure that the modem router is activated successfully.
Page 19
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide The cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield of...
C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Chapter 3. Configure the Modem Router With a Web-based management page, it is easy to configure and manage the Archer CR700 AC1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router. The Web-based management page can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Page 21
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 3-3 The detailed explanations for each Web page’s key function are listed below.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Chapter 4. Basic Network Map Network Map provides a dashboard that lets you see the status of your Internet connection and network at a glance. You can click any of the eight sections of the dashboard to view the etail information.
Page 23
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 4-2 Dynamic IP Choose Dynamic IP in the drop-down list, the modem router will be able to obtain IP network information dynamically from a DHCP server provided by your ISP.
Page 24
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Primary DNS/ Secondary DNS - Here you can set DNS Server (at least one) manually. The Route will use this DNS Server for priority. Click the Apply button to save the settings.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 4-6 Username/Password - Enter the Username and Password provided by your ISP. These fields are case-sensitive. If you have difficulty with this process, please contact your ISP.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 4-7 Enable Wireless Radio – Check the box to enable the Wireless Radio. Name (SSID) – Create a name (up to 32 characters) for your 2.4GHz/5GHz wireless network.
Page 27
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 4-8 2.4GHz - If Enable Wireless Radio is selected, please complete the following parameters. Figure 4-9 Name (SSID) - Create a name for the guest network. When setting up a Guest network, it ...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5GHz - If Enable Wireless Radio is selected, please complete the following parameters. Figure 4-10 Network Name(SSID) - Create a name for the guest network. When setting up a Guest ...
Page 29
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 4-11 Folder Sharing Disk Settings: Scan - Click the button to display the information of the USB storage device connected to the modem router. Volume - The volume name of the USB drive the users have access to.
Page 30
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Before removing the USB storage device, you should click “ Safely Remove” to make sure that all your data have been saved completely. Removing device directly may cause your USB storage device crashed.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Select the checkboxes in Figure 4-13.according to your needs. Enable Authentication - If this checkbox is selected, then the folder sharing is need authentication. Write Access - If this checkbox is selected, then the sharing folder is allowed write ...
Page 32
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 4-15 Parental Control Settings Parental Control: Enable Parental Control - The switch for the parental control. If turn on the switch, the field will become green Devices Under Parental Control: Add - You can add a new device for the parental control by clicking this button.
Page 33
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide To add a new entry, please follow the steps below. Click the Add button and the next screen will pop-up. Figure 4-16 Add Parental Control Entry Click View Device button and the next screen will pop-up. You’d like to click the icon to select a device.
Page 34
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide White List Mode - Only the web entered within the White List will be allowed. Check the box to enable this mode. You’d like to click Add a new keyword button and input the net addresses which the child is allowed to access.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Chapter 5. Advanced Status Choose menu “Advanced→Status”, you can see the current status information about the modem router. Figure 5-1 Status Operation Mode Choose menu “Advanced→Operation Mode”, and you will see the screen as shown in Figure 5-2.Select your desired mode and then click Save.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Router Mode - The device enables multi-users to share Internet via Ethernet WAN (EWAN) using its interchangeable LAN4/WAN port and share it wirelessly at 450Mbps wireless speeds over the crystal clear 5GHz band and 1300Mbps over the 2.4GHz band.
Page 37
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-4 Connection Status: Connection Type – Display the connection type for WAN. IP/MAC Address - This field displays the current IP/MAC address of the Internet port.
Page 38
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide ReConnect –Click the ReConnect button to renew WAN lease, then the Note Dialog will appear. You can click the OK button to disconnect immediately. Connection settings: There are four different connection types, Dynamic IP, Static IP, L2TP(Dynamic IP) and L2TP(Static).
Page 39
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-6 WAN - Dynamic IP Current used MAC Address - This field displays the current MAC address of the Internet port. MAC Clone - You can select one of below methods to change MAC address for this WAN ...
Page 40
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-7 WAN - Static IP IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, ...
Page 41
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-8 User name/Password - Enter the Username and Password provided by your ISP. These fields are case-sensitive. If you have difficulty with this process, please contact your ISP.
Page 42
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-9 User name/Password - Enter the Username and Password provided by your ISP. These fields are case-sensitive. If you have difficulty with this process, please contact your ISP.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5.3.2 LAN Settings Choose “AdvancedNetworkLAN Settings” menu, and you will see the LAN screen (shown in Figure 5-10). Please configure the parameters for LAN ports according to the descriptions below.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Start IP Address - Enter a value for the DHCPv6 server to start with when issuing IP addresses. End IP Address - Enter a value for the DHCPv6 server to end with when issuing IP addresses.
Page 45
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-11 IPv6 LAN Settings IPv6 LAN Settings: IPv6 Address - Display the modem router’s local IPv6 Address. DHCPv6 Server Settings: DHCPv6 Server – Check the box to enable this function.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Unicast This is disabled by default. The minority of DHCPv6 Server of ISP will not support to enable this. When the modem router is connected right but IPv6 address cannot get, you can select this box.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5.3.5 Advanced Routing Choose “Advanced Network Advanced Routing”, you can view all the current groups on this page (shown in Figure 5-13). Figure 5-13 RIP Authentication – Check the box to enable the RIP Authentication function.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Wireless 2.4G Choose menu “Advanced→Wireless 2.4G”, you will see six submenus under the Wireless menu: Basic Settings, Primary Network, Guest Network, MAC Filtering, Wireless Bridging and Wireless Advanced. Click any of them, and you will be able to configure the corresponding function.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Power – Here you can specify the transmit the power of the modem router. You can select 25%, 50%, 75% and 100% which you would like. 100% is the default setting and is recommended.
Page 50
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-15 2.4GHz Primary Network: Name (SSID) – Create a name (up to 32 characters) for your 2.4GHz wireless network. The default SSID is set to be TP-LINK_XXXX.
Page 51
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Version –You can choose the version of the WPA-PSK/WPA2-PSK security by selecting Auto, WPA-PSK or WPA2-PSK. The default setting is WPA2-PSK. Encryption – You can choose the encryption by selecting Auto, TKIP or AES. The default ...
Page 52
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide device if you haven’t switch on Enable Router’s PIN. WPS Wizard: Select a setup method – You can select either of Push Button (Recommended) or PIN ...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-17 Step 2: Press and hold the WPS button of the client device directly. Step 3: The WPS LED flashes for two minutes during the Wi-Fi Protected Setup process.
Page 54
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-19 Settings: See each other - If Allow guests to see each other is selected, anyone who connects to the guest network can access each other.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Click Save button to save the settings. 5.4.4 Wireless Advanced Choose menu “Advanced → Wireless 2.4G → Wireless Advanced”, you can configure the advanced settings of your wireless network.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Enable Power Save Support - Check the box to enable this function. This function can make the wireless client has only antenna is in working condition, and the remaining antennas are dormant, so as to achieve the purpose of saving power.
Page 57
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Devices in List: Add - You can add a new device for the MAC Filtering rule by clicking Add button. MAC Address - This field displays the MAC address of the wireless station that cannot ...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-23 Wireless Stations Online: MAC Address - The MAC address of the wireless station online. Age(s) – Display the duration time of wireless station online.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Wireless 5G Choose menu “Advanced→Wireless 5G”, you will see six submenus under the Wireless menu: Basic Settings, Primary Network, Guest Network, MAC Filtering, Wireless Bridging and Wireless Advanced. Click any of them, and you will be able to configure the corresponding function.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Power – Here you can specify the transmit the power of the modem router. You can select 25%, 50%, 75% and 100% which you would like. 100% is the default setting and is recommended.
Page 61
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-26 2.4GHz Primary Network: Wireless Radio – Check the box to enable the Wireless Radio. Name (SSID) – Create a name (up to 32 characters) for your 5GHz wireless network. The ...
Page 62
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Version –You can choose the version of the WPA-PSK/WPA2-PSK security by selecting Auto, WPA-PSK or WPA2-PSK. The default setting is WPA2-PSK. Encryption – You can choose the encryption by selecting Auto, TKIP or AES. The default ...
Page 63
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide device if you haven’t switch on Enable Router’s PIN. WPS Wizard: Select a setup method – You can select either of Push Button (Recommended) or PIN ...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-28 Step 6: Press and hold the WPS button of the client device directly. Step 7: The WPS LED flashes for two minutes during the Wi-Fi Protected Setup process.
Page 65
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-30 Settings: See each other - If Allow guests to see each other is selected, anyone who connects to the guest network can access each other.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5.5.4 MAC Filtering Choose menu “Advanced → Wireless 5GHz → MAC Filtering”, you can control the wireless access by configuring the MAC Filtering function. Figure 5-31 Wireless 5GHz – MAC Filering 5GHz Access Control: Wireless Interface - Select an available wireless interface from the drop-down list.
Page 67
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide MAC Address - This field displays the MAC address of the wireless station that cannot access this router/can access this router. Modify - Click the icon to delete this entry.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-33 Wireless Stations Online: MAC Address - The MAC address of the wireless station online. Age(s) – Display the duration time of wireless station online.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide WDS Bridging - With this function, the modem router can bridge more WLANs. If you check the Enable WDS, you can click the Scan AP button to scan the nearby wireless access points.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Short GI Feature - This function is recommended for it will increase the data capacity by reducing the guard interval time Short GI is enabled by default.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-37 To add a IP Address Filtering entry: Click button, then you will see a setting page. Enter the Start IP Address and the End IP Address.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-39 To add a MAC Address Filtering entry: Click button, then you will see a setting page. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-41 To add a IP Address Filtering entry: Click button, then you will see a setting page. Enter the Start Port and the End Port. Select the Protocol which you want.
Page 74
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide External Port - The numbers of External Service Ports. You can enter a service port or a range of service ports (the format is XXX – YYY; XXX is the Start port and YYY is the End port).
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-43 Note: It is possible that you have a computer or server that has more than one type of available service. If so, select another service, and type the same IP address for that computer or server.
Page 76
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Applications - The applications you want to use. Triggering Port - The port for outgoing traffic. An outgoing connection using this port will trigger this rule.
Page 77
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-45 Add or Modify a Triggering Entry Note: When the trigger connection is released, the corresponding opened ports will be closed. Each rule can only be used by one host on the LAN at a time. The trigger connection of other hosts on the LAN will be refused.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5.6.6 DMZ Choose menu “Advanced → NAT Forwarding → DMZ”, and then you can view and configure DMZ host in the screen shown in Figure 5-44. The DMZ host feature allows one local host to be exposed to the Internet for a special-purpose service such as Internet gaming or videoconferencing.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-47 5.7 USB Settings Figure 5-48 The USB Settings menu There are four submenus under the USB Settings menu (shown in Figure 5-46): Disk Settings, Folder Sharing and Print Server. Click any of them, and you will be able to configure the...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5.7.1 Disk Settings Choose menu “Advanced→USB Settings→Disk Settings”, you can configure the USB disk drive attached to the modem router and view the information. Figure 5-49 Device Settings Click the Scan button to scan the USB drive connected to the router.
Page 81
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-50 Folder Sharing Sharing Account Account – You can select Use Default Account or Use Custom Account to log in sharing Folders. Use Default Account - Select this radio button, and the sharing account username is ...
Page 82
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Sharing Settings Network/Media Server Name - Show the name of the network/media server. This is the name used to access the USB device connected to the router.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-51 Add or Modify Share Folder Click the Add button and the next screen will pop-up as shown in Figure 5-50. Figure 5-52 Add Share Folder Select the volume desired to share from the Volume drop-down list.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5.8 Firewall Figure 5-53 The Firewall menu There are three submenus under the Security menu: Basic, Local Log, and Remote Log. Click any of them, and you will be able to configure the corresponding functions.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-55 5.8.3 Remote Log Choose menu “Advanced→ Firewall Remote Log”, and then you can configure the function in the screen as shown in Figure 5-532.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide System Tools Choose menu “Advanced→System Tools”, you will see eight submenus under the System Tools menu: System Information, Device Information, Connection Status, Diagnostic, Time Zone, Backup & Restore, Administrator and Event Log. Click any of them, and you will be able to configure the corresponding function.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide 5.9.2 Device Information Choose menu “Advanced→System Tools→Device Information”, you can see the current information about the modem router. Figure 5-58 5.9.3 Connection Status Choose menu “Advanced→System Tools→Device Information”, you can see the current...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-59 5.9.4 Diagnostic Choose menu “Advanced→System Tools→Diagnostic”, you can test the connectivity of the Internet on the following screen.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-60 Click Start Test to check the connectivity of the Internet. The page will display the result of diagnosis. Note: Only one user can use the diagnostic tools at one time.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-61 Time Settings: Time Zone - Select your local time zone from the pull down list. Time Server 1 / Time Server 2 / Time Server 3- Enter the address or domain of the Server 1 ...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-62 Backup: Click the Backup button to save all configuration settings as a backup file in your local computer. Restore: To restore the modem router's configuration, follow these instructions.
Page 92
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Figure 5-63 Account Management: Here you can set the account user information about Old Password, New Password and Confirm Password. It is strongly recommended that you should change the factory default user name and password of the router, because all users who try to access the router's Web-based utility or Quick Setup will be prompted for the router's default user name and password.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide the router's password. After successfully entering the username and password, you will be able to access the router's web-based utility. 5.9.8 Event Log Choose menu “Advanced→System Tools→Event Log”, and then you can view and clear the logs of the modem router.
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Appendix A: Specifications HARDWARE FEATURES 1 F-Connector, female 75 Ω Interface 4 10/100/1000Mbps RJ45 LAN Ports 2 USB 2.0 Ports 1 Power On/Off Button 1 Wi-Fi On/Off Button...
Page 95
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide HARDWARE FEATURES Frequency Plan DOCSIS Annex B Symbol Rate DOCSIS 64 QAM 5.057 Msym/s; 256 QAM 5.361 Msym/s –15 to 15 dBmV (DOCSIS) Operating Level Range Security DOCSIS 3.0 Security (BPI+, EAE, SSD)
Page 96
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide WIRELESS FEATURES IEEE 802.11ac/n/a 5GHz Wireless Standards IEEE 802.11b/g/n 2.4GHz 5GHz: Up to 1300Mbps Wireless Speeds 2.4GHz: Up to 450Mbps Frequency 2.4GHz and 5GHz EIRP <20dBm(EIRP) Wireless Functions...
Page 97
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide SOFTWARE FEATURES Web Based Configuration(HTTP), Command Line Interface; Management Remote management, SSL for TR-069, SNMP v1/v2c/v3; Diagnostic Tools Parental Control, Network Address Translation (NAT); Advanced Features RIP v1/v2(optional);...
Archer CR700 C1750 Wireless Dual Band DOCSIS 3.0 Cable Modem Router User Guide Appendix B: Technical Support Technical Support For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq To download the latest Firmware, Driver, Utility and User Guide, go to: http://www.tp-link.com/en/support/download...