TP-Link Archer CR700 User Manual page 49

Archer CR700
You cannot connect other device to this modem router by entering the router's PIN on your client
device if you haven't switch on Enable Router's PIN.
WPS Wizard:
Enable WPS - The switch for the WPS. If you turn on this button, the field will become green

and you can add a new wireless device to an existing network quickly by WPS (also called
QSS) function.
Select a setup method – You can select either of Push Button (Recommended) or PIN

Number as the WPS setup method.
Push Button (Recommended) – When you select this method, you can add a new device by

pressing the physical button on the router or by clicking the software push Connect button on
this screen.
PIN Number - When you select this method, you can add a new device by entering the

client's PIN in the field and then click Connect button.
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and modem router using either Push Button method or PIN
Number method.

Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the WPS Button
Use this method if your client device has a Wi-Fi Protected Setup (WPS) button.
Step 1: Press the physical button on the router (as shown in Figure 5-16) or click the software
push button: Connect (as shown in Figure 5-17).
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
41