Guest Network - TP-Link Archer CR700 User Manual

Archer CR700
Step 4: "Device has been added successfully!" will appear on the screen, which means the
client device has successfully connected to the modem router.

Note:
1) The WPS LED on the modem router will light green for five minutes if the device has been
successfully added to the network.
2) The WPS function cannot be configured if the Enable Router's PIN switch is off. Please
make sure the Enable Router's PIN switch is on before configuring the WPS.

5.5.3 Guest Network

Choose menu "Advanced→ Wireless 5G → Guest Network", you can configure the advanced
settings of your guest network.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-29
54