TP-Link Archer C54 User Manual
  1. Manuals
  2. Brands
  3. TP-Link Manuals
  4. Wireless Router
  5. Archer C54
  6. User manual

TP-Link Archer C54 User Manual

Ac1200 dual band wi-fi router
Hide thumbs Also See for Archer C54:
Table of Contents

Advertisement

Quick Links

User Guide
AC1200 Dual Band Wi-Fi Router
Archer C54
REV1.0.0 1910012708

Advertisement

Table of Contents
loading

Related Manuals for TP-Link Archer C54

Summary of Contents for TP-Link Archer C54

  • Page 1 User Guide AC1200 Dual Band Wi-Fi Router Archer C54 REV1.0.0 1910012708...

  • Page 2: Table Of Contents

    Contents About This Guide Chapter 1 Get to Know About Your Router 1. 1. Product Overview............4 1.
  • Page 3 4. 4. 1. Port Forwarding ............38 4.
  • Page 4 6. 1. Operation Mode ............76 6.

  • Page 5: About This Guide

    About This Guide This guide is a complement of Quick Installation Guide. The Quick Installation Guide instructs you on quick internet setup, and this guide provides details of each function and shows you the way to configure these functions appropriate to your needs. When using this guide, please note that features available of the router may vary by model and software version.
  • Page 6 • Specifications can be found on the product page at https://www.tp-link.com. • A TP-Link Community is provided for you to discuss our products at https://community.tp-link.com. • Our Technical Support contact information can be found at the...

  • Page 7: Chapter 1 Get To Know About Your Router

    Chapter Get to Know About Your Router This chapter introduces what the router can do and shows its appearance. It chapter contains the following sections: • Product Overview • Appearance...

  • Page 8: Product Overview

    Archer C54 generates a 2.4 GHz Wi-Fi across your house and a fast 5 GHz Wi-Fi, letting the whole family enjoy reliable Wi-Fi on every device. Moreover, it is simple and convenient to set up and use the TP-Link router due to its intuitive web interface and the powerful Tether app.

  • Page 9: The Back Panel

    Chapter 1 Get to Know About Your Router Status Indication The 2.4GHz wireless band is enabled. (2.4GHz Wireless) The 2.4GHz wireless band is disabled. The 5GHz wireless band is enabled. (5GHz Wireless) The 5GHz wireless band is disabled. At least one powered-on device is connected to the router’s LAN port.

  • Page 10: The Bottom

    Chapter 1 Get to Know About Your Router 1 2 3 The Bottom You can find the product label at the bottom of the router, then use default information on it to connect to the router. Note: 1. Use the default network names (SSIDs) and password to join the networks. Or scan the QR code to join the preset 2.4 GHz network directly.

  • Page 11: Chapter 2 Connect To The Internet

    Chapter Connect to the Internet This chapter contains the following sections: • Position Your Router • Connect to the Internet...

  • Page 12: Position Your Router

    Chapter 2 Connect to the Internet Position Your Router With the router, you can access your network from anywhere within the wireless network coverage. However, the wireless signal strength and coverage vary depending on the actual environment of your router. Many obstacles may limit the range of the wireless signal, for example, concrete structures or thick walls.

  • Page 13: Connect To The Internet

    Chapter 2 Connect to the Internet Connect to the Internet The Router provides three working modes: Wireless Router, Range Extender and Access Point. You can choose the mode to better suit your network needs and follow the guide to complete the configuration. 2 2 1 Wireless Router Mode Follow the steps below to connect your router.
  • Page 14 WPS. 1 ) Tab the WPS icon on the device’s screen. Here we take an Android phone as an example. 2 ) Immediately press the WPS button on your router. WLAN TP-Link HomeNetwork Close to Office TP-Link_123...

  • Page 15: Range Extender Mode

    Chapter 2 Connect to the Internet Note: If the above screen does not pop-up, it means that your IE Web-browser has been set to a proxy. Go to menu Tools > Internet Options > Connections > Settings, in the screen that appears, untick the Using Proxy checkbox, and click OK.

  • Page 16: Access Point Mode

    Chapter 2 Connect to the Internet Click Change Mode in the top right corner and select Range Extender Mode. Wait for the router to reboot. Follow the Quick Setup to set up the internet connection. Relocate: Place the router between your host router and the Wi-Fi dead zone. The location you choose must be within the range of your existing host network.
  • Page 17 Chapter 2 Connect to the Internet Connect the router to your wired host router’s Ethernet port via an Ethernet cable as shown above. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and password printed on the bottom label of the router. Enter http://tplinkwifi.net in the address bar of a web browser.

  • Page 18: Chapter 3 Log In To The Router

    Chapter Log In to the Router This chapter introduces how to log in to the web management page of the router.
  • Page 19 Chapter 3 Log In to the Router With the web-based utility, it is easy to configure and manage the router. The web- based utility can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft the Internet Explorer, Mozilla Firefox or Apple Safari. Follow the steps below to log in to your router.

  • Page 20: Chapter 4 Configure The Router In Wireless Router Mode

    Chapter Configure the Router in Wireless Router Mode This chapter presents how to configure the various features of the router working as a wireless router. It contains the following sections: • Operation Mode • Network • Wireless • NAT Forwarding •...

  • Page 21: Operation Mode

    Chapter 4 Configure the Router in Wireless Router Mode Operation Mode 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > Operation Mode. 3. Select the working mode as needed and click SAVE. Network 4 2 1 Status...
  • Page 22 Chapter 4 Configure the Router in Wireless Router Mode • Internet - This field displays the current settings of the internet, and you can configure them on the Advanced > Network > Internet page. • Status - Indicates whether the router has been connected to the internet. •...

  • Page 23: Internet

    Chapter 4 Configure the Router in Wireless Router Mode • - This field displays the current settings of the LAN, and you can configure them on the Advanced > Network > page. • MAC Address - The physical address of the router. •...
  • Page 24 Chapter 4 Configure the Router in Wireless Router Mode • MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. It is not recommended that you change the default MTU size unless required by your ISP. •...
  • Page 25 Chapter 4 Configure the Router in Wireless Router Mode • IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. • Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your ISP. Normally 255.255.255.0 is used as the subnet mask. •...
  • Page 26 Chapter 4 Configure the Router in Wireless Router Mode • User Name/Password - Enter the user name and password provided by your ISP. These fields are case-sensitive. • Secondary Connection - It’s available only for PPPoE connection. If your ISP provides an extra connection type, select Dynamic IP Static IP...
  • Page 27 Chapter 4 Configure the Router in Wireless Router Mode default value is 15 minutes. If you want the internet connection remains active all the time, enter 0 (zero). Note: Sometimes the connection cannot be terminated although you have specified the Max Idle Time because some applications are visiting the internet continually in the background.
  • Page 28 Chapter 4 Configure the Router in Wireless Router Mode • On Demand - In this mode, the internet connection will be terminared automatically after a specified inactivity period (Max Idle Time) and be re- established when you attempt to access the internet again. •...

  • Page 29: Mac Clone

    Chapter 4 Configure the Router in Wireless Router Mode • VPN Server IP/ Domain Name - Enter the VPN server’s IP address or domain name provided by your ISP. • MTU Size - The default MTU size is “1420” bytes, which is usually fine. It is not recommended that you change the default MTU Size unless required by your ISP.

  • Page 30: Lan

    Chapter 4 Configure the Router in Wireless Router Mode • Use Custom MAC Address - Select if your ISP requires you to register the MAC address and enter the correct MAC address in this field, in case the ISP binds the assigned IP address to the specific MAC address.

  • Page 31: Dhcp Server

    Chapter 4 Configure the Router in Wireless Router Mode • IPTV/VLAN - Select to enable the IPTV feature. • Mode - Select the appropriate mode according to your ISP. • LAN 1/2/3/4 - Assign your LAN port to whether function as the internet supplier or as the IPTV supplier.
  • Page 32 Chapter 4 Configure the Router in Wireless Router Mode 3. Enter other parameters if the ISP offers. The Default Gateway is automatically filled in and is the same as the LAN IP address of the router. 4. Click SAVE. Note: To use the DHCP server function of the router, you must configure all computers on the LAN as Obtain an IP Address automatically.

  • Page 33: Dynamic Dns

    Chapter 4 Configure the Router in Wireless Router Mode 4 2 7 Dynamic DNS The router offers the DDNS (Dynamic Domain Name System) feature, which allows the hosting of a website, FTP server, or e-mail server with a fixed domain name (named by yourself) and a dynamic IP address.

  • Page 34: Static Routing

    Chapter 4 Configure the Router in Wireless Router Mode 4. Enter the Username for your DDNS account. 5. Enter the Password for your DDNS account. 6. Enter the Domain Name you received from dynamic DNS service provider here. 7. If your service provider is NO-IP, select WAN IP binding to ensure that the domain name is bound to the WAN IP of this router.

  • Page 35: Wireless

    Chapter 4 Configure the Router in Wireless Router Mode • Network Destination - The destination IP address that you want to assign to a static route. This IP address cannot be on the same subnet with the WAN IP or LAN IP of Router A.
  • Page 36 Chapter 4 Configure the Router in Wireless Router Mode • 2.4GHz/5GHz - Select this checkbox to enable the 2.4GHz/5GHz wireless network. • Network Name (SSID) - Enter a value of up to 32 characters. The same Name (SSID) must be assigned to all wireless devices in your network. •...

  • Page 37: Guest Network

    Chapter 4 Configure the Router in Wireless Router Mode 4 3 2 Guest Network Guest Network allows you to provide Wi-Fi access for guests without disclosing your host network. When you have guests in your house, apartment, or workplace, you can create a guest network for them.

  • Page 38: Wireless Schedule

    Chapter 4 Configure the Router in Wireless Router Mode • Allow guests to access my local network Tick this checkbox if you want to allow the wireless clients on your guest network to communicate with the devices connected to your router’s LAN ports or main network via methods such as network neighbors and Ping.

  • Page 39: Wps

    Chapter 4 Configure the Router in Wireless Router Mode 4 3 4 WPS (Wi-Fi Protected Setup) can help you to quickly and securely connect to a network. This section will guide you to add a new wireless device to your router’s network quickly via WPS.
  • Page 40 Chapter 4 Configure the Router in Wireless Router Mode • Connects vis the Router’s PIN 1. Keep the WPS Status as Enabled and select Router’s PIN. 2. Enter the PIN on your personal device. You can use the default PIN or generate a new one.

  • Page 41: Additional Wireless Settings

    Chapter 4 Configure the Router in Wireless Router Mode 4 3 5 Additional Wireless Settings 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > Wireless > Additional Settings. 3. Configure the advanced settings of your wireless network and click Save. Note: If you are not familiar with the setting items on this page, it’s strongly recommended to keep the provided default values;...

  • Page 42: Nat Forwarding

    LAN and realize some specific functions. The TP-Link router includes four forwarding rules. If two or more rules are set, the priority of implementation from high to low is Port Forwarding, Port Triggering, UPNP and DMZ.
  • Page 43 Chapter 4 Configure the Router in Wireless Router Mode 1 Set your PC to a static IP address, for example 192.168.0.100. 2 Visit http://tplinkwifi.net, and log in with the password you set for the router. 3 Go to Advanced > NAT Forwarding >...

  • Page 44: Port Triggering

    Chapter 4 Configure the Router in Wireless Router Mode 4 4 2 Port Triggering Port triggering can specify a triggering port and its corresponding external ports. When a host in the local network initiates a connection to the triggering port, all the external ports will be opened for subsequent connections.

  • Page 45: Upnp

    Chapter 4 Configure the Router in Wireless Router Mode 4 4 3 UPnP The UPnP (Universal Plug and Play) protocol allows the applications or host devices to automatically find the front-end NAT device and send request to it to open the corresponding ports.

  • Page 46: Parental Controls

    Chapter 4 Configure the Router in Wireless Router Mode between internal hosts and external hosts. The DMZ host becomes a virtual server with all ports opened. When you are not clear about which ports to open in some special applications, such as IP camera and database software, you can set the PC to be a DMZ host.
  • Page 47 Chapter 4 Configure the Router in Wireless Router Mode I want to: Block access to inappropriate online content for my child’s devices, restrict internet access to 2 hours every day and block internet access during bed time (10 PM to 7 AM) on weekdays.
  • Page 48 Chapter 4 Configure the Router in Wireless Router Mode 1 ) Enter the key word of the website that you want to block. Click if want to block multiple websites. 2 ) Click NEXT. 6 Set time restrictions on internet access.

  • Page 49: Qos

    Chapter 4 Configure the Router in Wireless Router Mode 1 ) Enable Time Limits on Monday to Friday and Saturday & Sunday then set the allowed online time to 2 hours each day. 2 ) Enable Bed Time on School Nights and use the up/down arrows or enter times in the fields.

  • Page 50: Security

    Chapter 4 Configure the Router in Wireless Router Mode Done! You can now enjoy playing games without lag on your computer for the next 2 hours. Security This function allows you to protect your home network from cyber attacks and unauthorized users by implementing these network security functions.
  • Page 51 Chapter 4 Configure the Router in Wireless Router Mode Block or allow specific client devices to access my network (via wired or wireless). How can I do that? 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2.
  • Page 52 Chapter 4 Configure the Router in Wireless Router Mode 2 ) Add devices to the whitelist. • Add connected devices Click Select From Device List and select the devices you want to be allowed. • Add unconnected devices Click Add Manually and enter the Device Name MAC Address...

  • Page 53: Ip & Mac Binding

    Chapter 4 Configure the Router in Wireless Router Mode Done! Now you can block or allow specific client devices to access your network (via wired or wireless) using the Blacklist or Whitelist. 4 7 3 IP & MAC Binding IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network device’s IP address to its MAC address.

  • Page 54: Alg (Application Layer Gateway)

    Chapter 4 Configure the Router in Wireless Router Mode 2 ) Click VIEW CONNECTED DEVICES and select the device you want to bind. Or enter the MAC Address IP Address that you want to bind. 3 ) Click ADD. ALG (Application Layer Gateway) View your ALG (Application Layer Gateway) settings in this page.
  • Page 55 Chapter 4 Configure the Router in Wireless Router Mode • If you select Router: Fill in WAN and LAN information as required by different connection types. Normal: The default connection type. 1 ) Configure the WAN settings. 2 ) Configure the LAN settings. Fill in Address Prefix provided by your ISP.
  • Page 56 Chapter 4 Configure the Router in Wireless Router Mode PPPoE: Select this type if your ISP uses PPPoEv6, and provides a username and password. 1 ) Configure the WAN settings. 2 ) Configure the LAN settings. Fill in Address Prefix provided by your ISP.

  • Page 57: System

    Click SAVE. No configuration is required. 4 10 System 4 10 1 Firmware Upgrade TP-Link is dedicated to improving and richening the product features, giving users a better network experience. We will release the latest firmware at TP-Link official website...
  • Page 58 1. Download the latest firmware file for the router from our website www.tp-link.com. 2. Visit http://tplinkwifi.net, and log in with the password you set for the router. 3. Go to Advanced >...

  • Page 59: Backup & Restore

    Chapter 4 Configure the Router in Wireless Router Mode 4 10 2 Backup & Restore The configuration settings are stored as a configuration file in the router. You can backup the configuration file in your computer for future use and restore the router to the previous settings from the backup file when needed.

  • Page 60: Change Password

    Chapter 4 Configure the Router in Wireless Router Mode 4 10 3 Change Password 1. Visit http://tplinkwifi.net, and log in with the password you set for the router. 2. Go to Advanced > System > Administration, and focus on the Change Password section.

  • Page 61: Remote Management

    Chapter 4 Configure the Router in Wireless Router Mode 2. Click Device. 3. Click VIEW CONNECTED DEVICES and select the device to manage the router from the Connected Devices list, or enter the MAC address of the device manually. 4. Specify a Description for this entry.
  • Page 62 Chapter 4 Configure the Router in Wireless Router Mode 1. Tick the Enable checkbox of Remote Management. 2. Keep the HTTP port as default setting (recommended) or enter a value between 1024 and 65535. 3. Select All Devices Remote Managers. 4.

  • Page 63: System Log

    Chapter 4 Configure the Router in Wireless Router Mode 3. Select Specified Device Remote Managers. 4. In the Only this IP Address field, enter the IP address of the remote device to manage the router. 5. Click SAVE. Devices using this WAN IP can manage the router by logging in to http://Router’s WAN IP:port number (such as http://113.116.60.229:1024).
  • Page 64 Chapter 4 Configure the Router in Wireless Router Mode 2. Go to Advanced > System > Diagnostics. 3. Enter the information: 1 ) Choose Ping Tracert as the diagnostic tool to test the connectivity; • Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time.

  • Page 65: Time Settings

    Chapter 4 Configure the Router in Wireless Router Mode 4 10 8 Time Settings This page allows you to set the time manually or to configure automatic time synchronization. The router can automatically update the time from an NTP server via the internet.

  • Page 66: Reboot

    Chapter 4 Configure the Router in Wireless Router Mode 2. Select the start time from the drop-down list in the Start fields. 3. Select the end time from the drop-down list in the fields. 4. Click SAVE. Note: This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log in to the router successfully;...

  • Page 67: Led Control

    Chapter 4 Configure the Router in Wireless Router Mode 3. Click SAVE. 4 10 10 LED Control The LED of the router indicates its activities and status. You can enable the Night Mode feature to specify a time period during which the LED is off. 1.
  • Page 68 Chapter 4 Configure the Router in Wireless Router Mode...

  • Page 69: Chapter 5 Configure The Router In Access Point Mode

    Chapter Configure the Router in Access Point Mode This chapter presents how to configure the various features of the router working as an access point. It contains the following sections: • Operation Mode • Firmware Upgrade • Backup & Restore •...

  • Page 70: Operation Mode

    3. Select the working mode as needed and click SAVE. Firmware Upgrade TP-Link is dedicated to improving and richening the product features, giving users a better network experience. We will release the latest firmware at TP-Link official website www.tp-link.com. You can download the latest firmware file from the...

  • Page 71: Backup & Restore

    Chapter 5 Configure the Router in Access Point Mode Backup & Restore The configuration settings are stored as a configuration file in the router. You can backup the configuration file in your computer for future use and restore the router to the previous settings from the backup file when needed.

  • Page 72: Administration

    Chapter 5 Configure the Router in Access Point Mode 1. Click FACTORY RESTORE to reset the router. 2. Wait a few minutes for the restoring and rebooting. Note: • During the resetting process, do not turn off or reset the router. •...

  • Page 73: System Log

    Chapter 5 Configure the Router in Access Point Mode • Allow specific devices to manage the router: 1. Select Specified Devices Local Managers and click SAVE. 2. Click Device. 3. Click VIEW CONNECTED DEVICES and select the device to manage the router from the Connected Devices list, or enter the MAC address of the device manually.

  • Page 74: Diagnostic

    Chapter 5 Configure the Router in Access Point Mode 3. Click SAVE TO LOCAL to save the system logs to a local disk. Diagnostic Diagnostic is used to test the connectivity between the router and the host or other network devices. 1.

  • Page 75: Time Settings

    Chapter 5 Configure the Router in Access Point Mode • Tracert is used to display the route (path) your router has passed to reach the tested host, and measure transit delays of packets across an Internet Protocol network. 2 ) Enter the IP Address Domain Name of the tested host.
  • Page 76 Chapter 5 Configure the Router in Access Point Mode • To set System Time: 1. Select the way in which the router gets its time: Get from Internet, Get from Managing Device, Manually. 2. Select your local Time Zone. 3. Enter the address or domain of the NTP Server 1 NTP Server 4.

  • Page 77: Reboot

    Chapter 5 Configure the Router in Access Point Mode Reboot Some settings of the router will take effect only after rebooting, and the system will reboot automatically. You can also reboot the router to clear cache and enhance running performance. 1.
  • Page 78 Chapter 5 Configure the Router in Access Point Mode 4. Specify the LED off time, and the LED will be off during this period every day. Note: The effective LED off time is based on the time of the router. You can go to Advanced >...

  • Page 79: Chapter 6 Configure The Router In Range Extender Mode

    Chapter Configure the Router in Range Extender Mode This chapter presents how to configure the various features of the router working as a range extender. It contains the following sections: • Operation Mode • Firmware Upgrade • Backup & Restore •...

  • Page 80: Operation Mode

    3. Select the working mode as needed and click SAVE. Firmware Upgrade TP-Link is dedicated to improving and richening the product features, giving users a better network experience. We will release the latest firmware at TP-Link official website www.tp-link.com. You can download the latest firmware file from the...

  • Page 81: Backup & Restore

    Chapter 6 Configure the Router in Range Extender Mode Backup & Restore The configuration settings are stored as a configuration file in the router. You can backup the configuration file in your computer for future use and restore the router to the previous settings from the backup file when needed.

  • Page 82: Administration

    Chapter 6 Configure the Router in Range Extender Mode 1. Click FACTORY RESTORE to reset the router. 2. Wait a few minutes for the restoring and rebooting. Note: • During the resetting process, do not turn off or reset the router. •...

  • Page 83: System Log

    Chapter 6 Configure the Router in Range Extender Mode • Allow specific devices to manage the router: 1. Select Specified Devices Local Managers and click SAVE. 2. Click Device. 3. Click VIEW CONNECTED DEVICES and select the device to manage the router from the Connected Devices list, or enter the MAC address of the device manually.

  • Page 84: Time Settings

    Chapter 6 Configure the Router in Range Extender Mode 3. Click SAVE TO LOCAL to save the system logs to a local disk. Time Settings This page allows you to set the time manually or to configure automatic time synchronization. The router can automatically update the time from an NTP server via the internet.

  • Page 85: Reboot

    Chapter 6 Configure the Router in Range Extender Mode 1. Select the way in which the router gets its time: Get from Internet, Get from Managing Device, Manually. 2. Select your local Time Zone. 3. Enter the address or domain of the NTP Server 1 NTP Server 4.

  • Page 86: Led Control

    Chapter 6 Configure the Router in Range Extender Mode • To reboot the router manually: Click REBOOT, and wait a few minutes for the router to reboot. • To set the router to reboot regularly: 1. Tick the Enable box of Reboot Schedule.
  • Page 87 Chapter 6 Configure the Router in Range Extender Mode 4. Specify the LED off time, and the LED will be off during this period every day. Note: The effective LED off time is based on the time of the router. You can go to Advanced >...

  • Page 88: Faq

    Q1 What should I do if I forget my wireless password? The default wireless password is printed on the label of the router. If the password has been altered, please connect your computer to the router using an Ethernet cable and follow the steps below: 1.
  • Page 89 4 ) Click LAN settings and deselect the following three options, and click OK. 5 ) Go to Advanced > Restore advanced settings, and click OK.
  • Page 90 • Use another web browser or computer to log in again. • Reset the router to factory default settings and try again. If the login still fails, please contact the technical support. Note: You’ll need to reconfigure the router to surf the internet once the router is reset. Q4 What should I do if I cannot access the internet even though the configuration is finished? Visit http://tplinkwifi.net, and log in to with the password you set for the router.
  • Page 91 • Restart the modem and the router. 1 ) Power off your modem and the router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes. 3 ) Power on the router, and wait another 1 or 2 minutes and check the Internet access.
  • Page 92 • Modify the LAN IP address of the router. Note: Most TP-Link routers use 192.168.0.1/192.168.1.1 as their default LAN IP address, it may conflict with the IP range of your existent ADSL modem/router. If so, the router is not able to communicate with your modem and cause you can’t access the Internet.
  • Page 93 6 ) Restart the modem and the router. • Please upgrade the firmware of the router. If you’ve tried every method above but cannot access the internet, please contact the technical support. Q5 What should I do if I cannot find my wireless network or I cannot connect to the wireless network? If you fail to find any wireless network, please follow the steps below: •...
  • Page 94 2 ) Exit the wireless configuration tool (the TP-Link Utility, for example). 3 ) Select and right click My Computer...
  • Page 95 • Windows unable to connect to XXXX / Can not join this network / Taking longer than usual to connect to this network: • Check the wireless signal strength of your network, if it is weak (1~3 bars), please move the router closer and try again. •...
  • Page 96 Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd.
  • Page 97 Component Name Model I. T .E. Power T090085-2B1 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com...
  • Page 98 20 cm from all persons and must not be co- located or operating in conjunction with any other antenna or transmitter.” We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
  • Page 99 Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
  • Page 100 2400 MHz -2483.5 MHz (20dBm) 5150 MHz -5250 MHz(23dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.com/en/ce RF Exposure Information This device meets the EU requirements (2014/53/EU Article 3.1a) on the limitation of...
  • Page 101 (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1) L’appareil ne doit pas produire de brouillage;...
  • Page 102 4.7.9.2高增益指向性天線只得應用於固定式點對點系統。 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 設備名稱：AC1200 Dual Band Wi-Fi Router 型號（型式）：Archer C54 Equipment name Type designation (Type) 限用物質及其化學符號 Restricted substances and its chemical symbols 單元 Unit 六價鉻 多溴聯苯 多溴二苯醚 鉛 汞...
  • Page 103 • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended •...

Table of Contents