TP-Link Archer CR700 User Manual page 93

Archer CR700
Diagnostic tool - There are two tools to diagnose, which is PING and Traceroute. You can

select the corresponding type according to your needs.
1) PING: If you select this option, you could check the status of the Internet connection.
IP Address – Enter the IP address that you want to PING.

PING Packet Size – Enter the size of the PING packet you want to use.

PING Count – Enter the number of times you want to ping the target device.

PING Interval – Enter the time period between each ping.

Click Start Test to check the connectivity of the Internet. The page will display the result
of diagnosis.
Click Abort Test to end the connectivity of the Internet.
Click Clear Results to delete the logs.
2) Traceroute: If you select this option, all the anonymous calls would be blocked.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-63
85