TP-Link Archer CR700 User Manual page 21

Archer CR700
Primary DNS/ Secondary DNS - Here you can set DNS Server (at least one) manually. The

Route will use this DNS Server for priority.
Click the Apply button to save the settings.
3) L2TP(Dynamic IP)
Choose L2TP(Dynamic IP) in the drop-down list if your ISP provides L2TP(Dynamic IP)
information to you. You should set User name, Password and Server IP Address/Name in the
screen below.
Username/Password - Enter the Username and Password provided by your ISP. These

fields are case-sensitive. If you have difficulty with this process, please contact your ISP.
Server IP Address/Name - Enter the server IP address or domain name provided by your

ISP. If you have difficulty with this process, please contact your ISP.
Click the Apply button to save the settings.
4) L2TP(Static)
Choose L2TP(Static) in the drop-down list if your ISP provides L2TP(Static) information to you.
You should set User name, Password, Server IP Address/Name, IP Address, Subnet Mask and
Default Gateway in the screen below.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 4-5
13