Port Filtering - TP-Link Archer CR700 User Manual

Archer CR700

5.6.3 Port Filtering

Choose menu "Advanced  NAT Forwarding  Port Filtering", and then you can control the
client's access by configuring the Port Filtering function.
Port Filtering:
Add - You can add a new device for the MAC Filtering rule by clicking

Delete - You can click

Start/End Port - Display the start port/end port that cannot access this router.

Protocol - The protocol used for this application, either TCP, UDP, or BOTH (all protocols

supported by the modem router).
Modify - Click the

you can click the
To add an IP Address Filtering entry:
1. Click button, then you will see a setting page.
2. Enter the Start Port and the End Port.
3. Select the Protocol which you want.
4. Check Enable this Entry for this entry, as shown in the following figure.
AC1750 Wireless Dual Band DOCSIS Cable Modem Router User Guide
Figure 5-41
button to delete the selected entries.
icon to edit the corresponding entry. If you want to delete this entry,
icon.
63
button.