Line To Master Function; Adjusting The Level Balance Of Lines 1/2; Adjusting The Volume Of Lines 1/2; Adjusting The Sensitivity Of The Touch Sensor - Denon MC3000 Owner's Manual

Top panel
SHIFT SEL. LOAD A/C LOAD B/D SHIFT
CUE CUE
CF MODE
Channel fader knob
Jog wheel Jog wheel
Rear panel
POWER

LINE TO MASTER function

LINE TO
Even if this device is not connected to a computer, the audio from
MASTER PAN
external devices such as CD players connected to the line 1/2 input
terminals can be output as the master level. Therefore, sound can be
output without interruption if the computer needs to be replaced or
restarted because of a crash or freeze, or when changing DJ's.
• DJ changeover can be done smoothly by using this function.
• DJ software audio and audio such as CD player audio can be mixed
and output.
GExampleH
1
After the DJ has finished performing, lower the
channel fader knob while rotating
LEVEL to the right.
The volume of the audio being output from the computer
lowers, and audio from an external device is output.
2
Replace the computer while the audio from the
external device is being output.
LINE TO
3
When the next DJ is ready, turn the
MASTER LEVEL
MASTER LEVEL
fader knob.
The volume of the audio being output from the external device
lowers, and audio from the computer is output.

Adjusting the level balance of lines 1/2

LINE TO MASTER PAN
Turn

Adjusting the volume of lines 1/2

LINE TO MASTER LEVEL
Turn
LINE TO MASTER
LINE TO
to the left, and raise the channel
.
.
11
Adjusting the sensitivity of the
touch sensor
The unit can control the sensitivity of the touch sensor for the Jog
wheel in 9 steps (–4 – 0 – +4).
• "–4" is the lowest sensitivity, and "+4" is the highest sensitivity.
• The default setting is "0".
1
While holding down LOAD A/C ,
MODE POWER
, press to turn on the power supply.
2
CF MODE
Press , and switch the jog wheel that you
want to adjust.
CUE
lights on the selected jog wheel side.
3
Turn SEL. to adjust the sensitivity.
The button lights according to the set sensitivity.
AUTO
Buttons CUE1 CUE2 CUE3 CUE4 EFX.1 EFX.2 EFX.3 EFX.4
LOOP
Sensitivity -4 -3 -2 -1 0
• If the jog wheel on the DECK side being adjusted detects a touch,
the jog wheel changes from red to blue.
4
SEL.
Press
The adjusted sensitivity is saved.
5
SHIFT
Press for DECK A or B.
The mode switches back from the sensitivity adjustment mode
to the normal mode.
LOAD B/D and CF
+1 +2 +3 +4