Microphone; Master - Denon MC4000 Operation Manual

Push the left encoder to trigger the selected Video Transition and the right
encoder to trigger the selected Master Video Effect.
Hold SHIFT down and then use the left encoder to adjust the 1
selected video Transition (if available) and the right encoder to adjust the 1
parameter of the selected Master Video Effect (if available)
Hold SHIFT down and then push the left encoder to open/close the FX GUI of the
selected Video Transition and the right one to open/close the FX GUI of the selected
Master Video Effect.
G. MICROPHONE
37. MIC1 LEVEL. Adjust the gain (input level), of MIC1
Microphone Input
38. MIC2 LEVEL. Adjust the gain (input level), of MIC2
Microphone Input
39. ECHO. Use this button to enable/disable the Echo Effect on
both Microphone Inputs. The amount of the applied Echo
Effect is controlled from the front panel of the unit.
40. TALK OVER. Use this button to enable/disable Talk Over (led will blink when
engaged). When enabled, the MC4000 detects the MIC inputs and attenuates the
audio signal level of the master output. When using the microphone, this function
prevents the microphone audio from being covered by the music, making speech
easier to hear
Hold SHIFT down and use this button to disable/enable MIC Inputs (Announcements)
to the Booth Output.
H. MASTER
25. MASTER VOLUME : Adjusts the Master Output Volume
(Hardware operation - movement not visible on the
VirtualDJ GUI)
26. BOOTH VOLUME. Adjusts the Booth Output Volume
(Hardware operation – movement not visible on the
VirtualDJ GUI)
27. AUX VOLUME. Adjust the gain (input level), of the Auxiliary
Input (Hardware Operation – not visible on the VirtualDJ
GUI)
VirtualDJ 8 – Denon MC4000
st
parameter of the
st
13