Jog Wheel Lock Function; Locking The Jog Wheel; Cancelling The Jog Wheel Lock; Usb Settings - Denon MC3000 Owner's Manual

Top panel
SHIFT SHIFT
VINYL
MODE
Jog wheel

Jog wheel lock function

Some DJ's prefer not to play using the jog wheel. This function can
also be used to prevent accidental operation of the jog wheel while
the DJ is playing.
In this case, use the following steps to lock the jog wheel. During
playback, the touch sensor and rotation operation are disabled.
• Even if the jog wheel is locked using this function, the touch sensor
and rotation operation are enabled when there is nothing being
played back. Therefore, the jog wheel can be used for searching
when tracks are not being played back.

Locking the jog wheel

Hold down SHIFT
MODE for the jog wheel that you want to lock.
VINYL MODE
flashes, and the jog wheel is locked.
VINYL

Cancelling the jog wheel lock

MODE
When the jog wheel is locked, hold down
DECK A or B, and press
Jog wheel
that you want to release.
The jog wheel lock is released, and the jog wheel returns to the
previous state (either VINYL mode or BEND mode).
for DECK A or B, and press VINYL
SHIFT
for
VINYL MODE for the jog wheel
12

USB settings

USB AUDIO Input/Output

This device is equipped with a sound card function that enables a
maximum of 4 channels (stereo, 2 input 2 output) of USB AUDIO input
and output.
The audio signals from lines 1/2 are output to a computer.
Further, the DJ software mixer output is output from the master
output terminal or headphone terminal of this device.
• USB 1/2 channel input DJ software master
• USB 3/4 channel input DJ software cue monitor
• USB 1/2 channel output MC3000 line 1 audio signal
• USB 3/4 channel output MC3000 line 2 audio signal