Other Functions; Fader Lock Function; Filter/Video Switching Mode; Adjusting The Touch Sense Sensitivity - Denon MC6000MK2 Owner's Manual

Other functions

フィルター/ビデオON/OFF切り替えボタン
Filter/Video ON/OFF switching button
フィルター/ビデオ調節つまみ
トラック選択つまみ
Filter/Video adjustment knob
Track select knob
LOOP IN/OUT
KEY LOCK
LOOP IN/OUT
LOAD
0 1
AUTO LOOP
  

   

   

   
 
 
 

 


ジョグホイール ジョグホイール
Jog wheel
CUE
SHIFT X-F LINK HOT CUE 1/2/3

Fader lock function

If the pitch fader position does not match the value stored in the
KEY LOCK
memory of the unit during the DECK change operation, MIDI
AUTO LOOP
commands are not sent. In this case, KEY LOCK flashes.
If the pitch fader position matches the value stored in the memory
Power
電源スイッチ
operation
of the unit, MIDI commands start to be sent again, and the button
switch
returns to the state before flashing.

Filter/video switching mode


On this unit, you can switch between controlling the filter function or
video function using the Filter/Video adjustment knob and Filter/Video
ON/OFF switching button.
1
Press the
simultaneously pressing
and the Filter/Video ON/OFF switching buttons.
2
Press either the left or right side Filter/Video

ON/OFF switching button.
Filter mode
Jog wheel
• When the left side Filter/Video ON/OFF switching button is
SHIFT
pressed, the filter function is controlled.
• The left side button lights and the right side button goes out.
Video mode
• When the right side Filter/Video ON/OFF switching button is
pressed, the video function is controlled.
• The right side button lights and the left side button goes out.
3
Press the track select knob to save the selected mode.
4
Press SHIFT
The mode returns from the setting mode to the normal mode.
power operation switch while
SHIFT for DECK 1/3 or 2/4
for DECK 1/3 or 2/4.
15
Adjusting the touch sense
sensitivity
The unit can control the sensitivity of the touch sensor for the Jog
wheel in 9 steps (–4 to 0 to +4).
• "–4" is the lowest sensitivity, and "+4" is the highest sensitivity.
• The default setting is "0".
1
Press the power operation
LOAD 0 1
simultaneously pressing
2
CUE
Press , and switch the jog wheel that you want
to adjust.
3
Rotate the track select knob, and adjust the
sensitivity.
The button lights according to the set sensitivity.
HOT HOT HOT
LOOP LOOP AUTO
CUE CUE CUE
Buttons
IN OUT LOOP
1 2 3
Sensitivity –4 –3 –2 –1 0
• If the jog wheel on the DECK side being adjusted detects a touch,
the jog wheel changes from red to blue.
4
Press the track select knob to memorize adjustment
data.
5
SHIFT
Press for DECK 1/3 or 2/4.
The mode switches back from the sensitivity adjustment mode
to the normal mode.
switch while
X-F LINK
and .
FX1- FX1- FX1-
L M R
+1 +2 +3 +4