Connecting To A Computer; Connecting The Power Cord - Denon MC3000 Owner's Manual

Connecting to a computer

Use the supplied USB cable to connect the unit with a computer so
that USB MIDI and USB AUDIO signals can be sent and received.
n Compatible computers
• Computers running the following computer OS versions can be
connected to this unit.
• Mac OS X 10.6 or later
• Windows XP SP3 or later (32 Bit only)
• Windows Vista SP2 or later (32 or 64 Bit)
• Windows 7 (32 or 64 Bit)
Computers running other OS versions may not be compatible
with the USB MIDI. For this reason, such computers may function
abnormally after connecting by USB to this unit.
• Mac, Mac OS is a registered trademark or trademark of Apple Inc.
in the United States and/or other countries.
• Windows is a registered trademark or trademark of Microsoft
Corporation in the United States and/or other countries.
.
n Automatic driver installation
When you connect the unit to a computer, drivers for the unit are
automatically installed in the computer.
When this unit is connected to a Windows computer, the following
message is shown at the bottom right of the screen.
Found New Hardware
USB AUDIO Device
Total Track Control
Once installation is completed, a message "Your new hardware
is installed and ready to use." appears as shown, and you can
operate the unit.
Found New Hardware
Your new hardware is installed and ready to use.
• For Mac OS, the unit can be used immediately after connecting.
4

Connecting the power cord

Insert the supplied AC adapter DC plug into the DC IN jack of the unit
and then insert the power plug to the outlet.
NOTE
Insert the plug fully and securely into the socket. Incomplete
connection to the power supply may cause damage to the unit, or
noise.
AC adapter AC adapter (supplied)
cable holder DC plug
(AC 120 V, 60 Hz)
U.S.A and Canada models
(AC 230 V, 50 Hz)
European,U.K and Asia/
Pacific models
To prevent the DC plug from disconnecting, it is recommended that
you should anchor the power cord to the AC adapter cable holder. Use
a Phillips screwdriver to secure it.
To AC outlet
To AC outlet