Denon MC3000 Owner's Manual page 32

q
w
e
r
t
y
u
i
o
Q0
Q1
Q2
Q3 Q4 Q5
W0
W1
W2
W3
W4
W5
W6
W7
W8
W9
E0
E1
E2
E3
E4
E5
Q6 Q7 Q8 Q9
Q7
VINYL switching button (VINYL MODE)
ON: Switches to VINYL mode.
• The touch sensor is enabled when in VINYL
mode.
OFF: Switches to BEND mode.
• The touch sensor is disabled when in BEND
mode.
SHIFT
u
• Hold down and press this button to
disable the jog wheel operation (jog wheel lock
function).
Q8
Channel fader knob
Adjusts the mixing level for each deck.
Q9
Crossfader knob
Adjusts the output balance of the channel level.
W0
Channel input level adjustment knob
(LEVEL)
W1
Mixer control channel selection button
(DECK A/C , DECK B/D)
Sets the mixer control channel to A (C) or B (D).
o DECK CHG.
• When is pressed, the control
channel switches in synchronization. This
button can also be used to select individual
control channels.
26
Top panel
W2
FX ON/OFF switching button (FX ON 1/2)
FX1: Switches the Flanger function ON/OFF.
u SHIFT
• Hold down and press this button to
switch the Brake function ON/OFF.
FX2: Switches the Beat Grid function ON/OFF.
u SHIFT
• Hold down and press this button to
switch the Backspin function ON/OFF.
W3
Channel isolator EQ adjustment knob
(HI/MID/LOW)
Adjusts the input signal frequency response for
each channel.
• When aligned at the central position, the
frequency response is flat.
W4
Load button (LOAD A/C, LOAD B/D)
Functions differ depending on the window.
BROWSER: When DECK A (C) is selected using
DECK CHG. SEL.
o W5
, the file selected using
loaded to DECK A (C).
o
When DECK B (D) is selected using
CHG. SEL.
, the file selected using W5 is loaded
to DECK B (D).
u SHIFT
• Hold down and press the button to
load to either DECK C (A) or DECK D (B).
SAMPLER: Selects the SAMPLER DECK.
EFFECTS: Selects the EFFECT DECK.
RECORD: Not available.
is
DECK