Basic Operation; Mic (Mic Input); Headphone Monitor; Select - Denon DN-X600 Owner's Manual

Basic operation

LEVEL

SOURCE SEL

MASTER
LEVEL
ON/OFF(MIC)

MIC TRIM

DUCKING

MIC LED

SELECT

EQ HI,LOW
(MIC)
EFX INS
MIC LEVEL
MONITOR
CH1,CH2
PAN
PHONES
LEVEL
SPLIT CUE
Channel fader
EQ HI,MID,LOW
Cross fader
9
Basic operation
POWER
1
BEATo,p POWER
TAP Press
The power to the unit switches on, and the BPM display is
shown.
2
Select the input source for each channel using
SOURCE SEL
3
Adjust the input level using LEVEL.
The input level is displayed in the cue master level meter.
4
Adjust the sound quality between
5
Adjust the volume using the channel fader and cross
fader.
6
Adjust the output level using

MIC (Mic input)

1
Press ON/OFF (MIC)
ON/OFF (MIC)
•
• MIC input is activated.
2
Press SELECT
The MIC LED is lit.
EFX ON/OFF
3
Adjust the mic input level using
EFX SELECT
The optimum adjustment without distortion is at the position
SEND/RETURN
when the SIG/PK display is lit orange and occasionally lights
red during microphone activity.
4
Adjust the mic sound quality using
5
Adjust the mic output level using
.
.
EQ HI, MID, LOW

MASTER LEVEL.

.
lights up.
to select MIC.
MIC TRIM
.
EQ HI LOW
and
MIC LEVEL
.
n To apply effects to the mic input
EFX INS (MIC/AUX1)
Press .
n To activate the ducking function
The ducking function attenuates the master output sound signal level
when mic input is detected. It prevents the mic volume being covered
by the music volume when a mic is used.
DUCKING
Press .
DUCKING
• LED is lit green.

Headphone monitor

.
There are two methods for headphone monitoring. Switch between
the two as desired for use.
1
Press MONITOR CH1 or CH2
monitor.
The selected button lights up.
2
SPLIT CUE
Press to select the monitoring method.
SPLIT CUE mode
SPLIT CUE mode
SPLIT CUE
• lights up.
• The channel sound (CUE) selected in step 1 is outputted from
the left headphone.
• The master sound is outputted from the right headphone.
• The sound is monaural sound.
STEREO mode
SPLIT CUE
• switches off.
• The channel sound (CUE) selected in step 1 and master
sound output in stereo.
3
Rotate PAN to adjust the balance between the CUE
.
sound and master sound.
4
Adjust the headphone volume using
NOTE
When using headphones, be cautious to avoid prolonged loud volume
in order to protect your ears.
to select the source to
STEREO mode
PHONES LEVEL .