Denon MC3000 Owner's Manual page 27

q
w
e
r
t
y
u
i
o
Q0
Q1
Q2
Q3 Q4 Q5
W0
W1
W2
W3
W4
W5
W6
W7
W8
W9
E0
E1
E2
E3
E4
Q6 Q7 Q8 Q9
u
Shift button (SHIFT)
i
Hot cue switch button and display
(CUE 5 – 8)
The button switches CUE 1 – 4/CUE 5 – 8.
• When CUE 5 – 8 is selected, the display lights
up.
o
Deck switch button (DECK CHG.)
Selects the deck.
Q0
Key lock button (KEY LOCK)
With this ON, the key does not change even if
you adjust the tempo during playback.
Q1
Jog wheel
Performs the search operation or bend operation.
u SHIFT
• Hold down and turn to scroll through
the list.
Q2
Pitch fader slider
Adjusts the playback pitch.
• Move the knob toward the "–" direction to
slow down the pitch and the "+" direction to
speed up the pitch.
Q3
Beat sync button (SYNC)
Performs auto beat matching.
u SHIFT
• Hold and press this button to set
the currently selected deck to the beat sync
master deck.
Q4
Hot cue button (CUE)
Sets the hot cue point and stutters the hot cue
point when pushed repeatedly.
u SHIFT
• Hold down and press this button to
jump to the start of the deck.
21
Top panel
1/3
Q5
Play/pause button ( )
e SAMP.
Hold down and press this button to
batch playback the sample slot.
Also, The operations differ as follows
depending on whether deck A (B) or C (D) are
o DECK CHG.
selected using
DECK A (B): Plays back when pressed while
playback is stopped. Pauses playback when
pressed during playback.
DECK C (D): Plays back the sample slots
in a batch. Pauses all when pressed during
playback.
Q6
Pitch bend adjustment buttons
(PITCH BEND –/+)
Adjust the pitch temporarily.
u SHIFT
• Hold down and press this button to
fast forward/rewind.
Q7
VINYL switching button
(VINYL MODE)
ON: Switches to VINYL mode.
• The touch sensor is enabled when in VINYL
mode.
OFF: Switches to BEND mode.
• The touch sensor is disabled when in BEND
mode.
u SHIFT
• Hold down and press this button to
disable the jog wheel operation (jog wheel lock
function).
Q8
Channel fader knob
Adjusts the mixing level for each deck.
Q9
Crossfader knob
Adjusts the output balance of the channel level.
W0
Channel input level adjustment knob
(LEVEL)