Switching Midi Input/Output Channels; Setting The Midi Command Transmission Interval Time - Denon MC3000 Owner's Manual

Top panel
BROWSE
SAMPLE RECORD
EFX
CUE 1 – 4
SEL.
CF MODE
SHIFT LEVEL
METER

Switching MIDI input/output channels

1
Press one of
CUE 1 – 4
holding down
CUE
The that corresponds to the MIDI channel lights, and the MIDI
channel is switched as shown below.
• The MIDI channel is made up of 4 channels.
G Lights CUE H
CUE 1 : CH 1 – 4
CUE 3 : CH 9 – 12
G MIDI channel switching H
BROWSE : CH 1 – 4
EFX : CH 9 – 12
2
Release SHIFT
The mode returns to normal mode from the channel setting
mode.
SHIFT
n Checking the settings
Press CF MODE while holding down
CUE
The corresponding to the current MIDI channel flashes.
The following buttons and switches do not support MIDI output.
MIC LEVEL
•
MONITOR PAN
•
MONITOR PHONES
•
LINE TO MASTER PAN
•
LINE TO MASTER LEVEL
•
MASTER LEVEL
•
DECK/MASTER
•
BROWSE/SAMPLE/EFX/RECORD
while
SHIFT .
CUE 2 : CH 5 – 8
CUE 4 : CH 13 – 16
SAMPLE : CH 5 – 8
RECORD : CH 13 – 16
.
SHIFT .
14
MIDI command input/output
Setting the MIDI command transmission
interval time
Depending on the computer specifications and OS type, the computer
may not be able to receive the MIDI commands transmitted from this
unit correctly.
In this case, use the following operation to set the MIDI command
transmission interval time to a suitable value.
1
While pressing BROWSE , RECORD
together, press POWER .
LEVEL METER
The power switches on, the
switches to the setting mode for MIDI command transmission
interval time.
2
Turn SEL.
The relationship between the level display position of the
LEVEL METER
and the MIDI command transmission interval
time is as shown in the diagram on the left.
G Setting value H
10 msec 20 msec
9 msec
8 msec 19 msec
18 msec
7 msec 17 msec
6 msec 16 msec
5 msec 15 msec
4 msec 14 msec
3 msec 13 msec
- 12 msec
- 11 msec
G Example H
Transmission
送信間隔時間
3 msec 4 msec
interval time
LEVEL METER
• The factory setting is 4 msec.
3
Press SEL.
The MIDI command transmission interval time is entered.
4
SHIFT
Press on DECK A or B.
The settings are completed, and unit exits the setting mode.
and CF MODE
lights, and the unit
13 msec 20 msec