Front Of Unit; Rear Of Unit; Front Panel Display Layout; Front Panel Indicators - THOMSON RD1000 User Manual

2.1

Front of Unit

2.2

Rear of Unit

2.3

Front Panel Display Layout

The following figure shows a typical screen on the front panel. Several important features have been circled
and noted below. These features are common to all screens and assist when navigating, viewing and editing
unit information. The
selected parameter, the
must be pressed again before the change takes effect on the unit. Pressing the
mode without changes taking effect.
2.4

Front Panel Indicators

The unit has three internal error parameters: INPUT, FAN and TEMPERATURE. These parameters can be
monitored locally or remotely. Locally the unit's status can be checked by visually looking at the INPUT LED
and the ERROR LED on the front panel, then use the "Error List" under the
Page 16
Edition 2 – October 2010
button will return the user to the home level while in any screen. In order to edit a
button must be pressed. Once a parameter has been changed, the
1

Tune Mode:PID Lock
3
PID Select:Manual
►PCR PID
1. Icons indicate which control buttons are currently valid for entry.
2. Screen title.
3. Cursor shows which line is active.
4. When editing, active character or item is highlighted.
2
RDS1 Serv Setup
:0x0031
button will leave an edit
1

4
button to pinpoint the error.
THOMSON RD1000 / RD1002
Receiver Descrambler - User Manual (release 7.3.1)
button