Table of Contents
Advertisement
This chapter describes the basic functions of the K2 Blu, which are always available, regardless of the currently
selected source.
FM100
K2 Blu
/
/
/
FM100
K2 Blu
-
+
Basic functions of the K2 Blu
Source switching
The desired source is selected by pressing the source button
front panel, repeatedly if necessary.
The source buttons on the FM100 remote control handset can be used to select
the desired listening source as follows:
Streaming Client
iPod
Disc Player
TAPE input
Radio input
TV IN input
AUX IN input
DIG IN 1 input
DIG IN 2 input
Bluetooth input
Once you have switched the K2 Blu to the desired source, you can listen to
that source and also record the signal using the recorder outputs (TAPE OUT).
Internal sources, iPods connected to the K2 Blu and source devices connected
via the E LINK system, can be controlled using the FM100 remote control
handset or the front panel buttons, provided that they are selected as the
current listening source. For details on operating the K2 Blu's integral source
devices please refer to the following chapters.
Volume control
The volume of the K2 Blu can be adjusted in fine increments using the
/
buttons on the machine's front panel, or -
remote control handset. A brief press of one of the volume buttons increases or
reduces the volume level by one increment. Holding one of the volume buttons
pressed in changes the volume level continuously.
brief press on the
button
long press on the
button
brief press on the
button
brief press on the
button
brief press on the
/
brief press on the
/
press the
/
button repeatedly if necessary
press the
/
button repeatedly if necessary
press the
/
button repeatedly if necessary
press the
/
button repeatedly if necessary
on the
button
button
+ rocker on the
11
Advertisement
Table of Contents
