Table of Contents
Advertisement
Disc drawer
Operating buttons
Source select
Disc mechanism functions
STOP / OPEN
STOP
PLAY / PAUSE
Menu functions
Source menu
System menu/
Alarm Timer
Loudspeaker / Volume
/
The drawer is opened and closed by pressing the
Alternatively the drawer can be opened with a long press on the
on the remote control handset, and closed again by pressing the
on the handset.
Pressing this button selects the desired listening source. Press the button
repeatedly until the desired listening source appears on the screen.
The signal generated by the selected source can now be reproduced via the
loudspeakers. The signal is also present at the TAPE-OUT output sockets for
recording.
Button for opening and closing the disc drawer.
Ends playback
Starts playback
Halts current playback (pause)
Resumes playback after a pause
Brief press:
opens the menu for the selected source (DVD/Blu-ray track
menu, Tuner menu, etc.)
A long press opens the Setup menu for the following sources:
Source
Setup menu
Streaming Client:
network setup
Brief press:
opens the 'System Configuration' menu
(for further details see the chapter entitled 'System settings')
Long press:
opens the alarm timer menu (see chapter entitled 'Alarm
Timer')
Returns to the previous point / change button
Confirms the input / change button
Selects the next point within a list / select button
Selects the previous point within a list / select button
Confirm / select button in menus and lists
A brief press selects the highlighted menu point / list point
Switches the loudspeaker output on and off:
If speakers are connected to loudspeaker output B, you can cycle through the
following modes of operation by repeatedly pressing this button:
Brief press:
loudspeaker group
* only if loudspeakers B are connected
Long press:
Switches the loudspeakers off
A brief press on the button terminates muting.
Increases / reduces volume
button.
button
button
(see chapter 'Network configuration')
A
B*
A+B*
5
Advertisement
Table of Contents
