Table of Contents
Advertisement
FM100
K2 Blu
/
Tone settings
Menu point
Treble
Bass
Tone Control
Loudness
Balance
Balance A
L/R balance for
loudspeaker group A
Balance B
L/R balance for
loudspeaker group B
(The menu point only appears if
loudspeaker group B is connected)
Tone settings (Tone menu)
The K2 Blu features a range of facilities designed to enable you to adjust the
sound to suit your personal preferences, the physical arrangement of your
system components, and the acoustics of your listening room. All these
settings are adjusted in the tone control menu (TONE menu). The tone control
menu can be called up using either the
handset, or via the Tone menu point (tone settings) within the
The K2 Blu features automatic loudspeaker detection, which it invokes every time
it is switched on to indicate which loudspeakers are connected to it.
Some points in the Tone menu only appear if the associated loudspeakers are
actually connected to the system, and are switched on in the System menu. If the
relevant loudspeakers are not present in the system, then the set-up points
relating to them are not displayed. This restricts the task of operating the system
to the facilities actually present, and considerably simplifies the procedure.
If some menu points do not appear, even though the associated loudspeakers
are correctly connected, please refer to the notes in the chapter entitled
'Trouble-shooting'.
Adjustment range options:
-12 ... 0 ... +12
off / on
off / on
70L ... 0 ... 70R
70L ... 0 ... 70R
button on the remote control
Explanation:
These two menu points are used to adjust the
treble and bass settings.
This menu point can be used to disable (by-
pass) the K2 Blu' s tone controls.
To switch off the tone controls, select the
"OFF" setting. When the tone controls are
switched off, any adjustments you make to the
following menu points "BASS" and "TREBLE"
have no effect.
The K2 Blu features a volume-dependent tone
correction
system
(LOUDNESS)
compensates
for
the
variation in the sensitivity of the ear at very low
volume levels due to the physiology of the
human auditory system.
This set-up option is used to switch loudness on
or off.
This menu point is used for altering the level
balance
between
the
loudspeakers, in order to compensate for an
imperfect listening position.
The level balance can be adjusted in
increments of 1 dB; the current value is
displayed on-screen.
Setting as in the previous menu point, but for
loudspeaker group B.
menu.
which
frequency-dependent
left
and
right
13
Advertisement
Table of Contents
