Table of Contents
Advertisement
Screen brightness
Functions available in stand-
by mode
Stand-by current drain
84
Notes on Energy Saving
The K2 Blu fulfils the requirements of the latest directives designed to
economise on the use of energy (EuP directive). The modern construction of its
mains PSU and the highly efficient design of the switch-mode output
stage play an important role in this.
The internal micro-processor constantly ensures that sub-assemblies which are
not required for the current task are switched off automatically.
In stand-by mode the current drain depends on the functions of the K2 Blu
which are still active. Please refer to the table below for more details.
ECO stand-by
Screen off
* Alarm timer without
display
* Can be switched on
using remote control
(except FD 100)
0.75 W
In accordance with EU regulations designed to limit stand-by consumption, the
default factory setting for the K2 Blu is the ECO stand-by mode.
If you wish to use the additional functions of the Comfort stand-by mode (On),
you must switch it on in the menu System Configuration / Stand.by-mode.
Comfort stand-by
Screen off
* Alarm timer
* Can be switched on by remote control including
the FD 100
* Clock display
* Automatic clock setting (VHF-RDS)
2 W
Screen brightness 1 ... 4
5 W
Advertisement
Table of Contents
