Controls and functions
1
On- / Off switch
j
2
Navigation and control / Source selection
Source selection
Control
Navigation
3
Level meter
16
Pressing this button briefly switches the device on and off. When the unit is switched
on the indicator LED around the button lights up.
Please note the hints in the chapter Automatic power down function on page 24.
The
button remains dimly lit even in comfort stand-by mode, to indicate
that the R 2500 R is ready for use.
To select a source, first press the corresponding source category button (SCL, DISC,
RADIO or INPUT) and select the desired source from the displayed list by turning
the rotary knob. The selected source will be activated by briefly pressing the rotary
knob.
Rotating this control selects a track for playback; the selected track then
appears on the screen. As soon as the desired track number lights up,
the track can be started by pressing the incremental control.
The rotary knob is also used for functions such as navigating within lists,
controlling menus, and creating playback programs.
The purpose of the VU meter is to display and monitor the level of left and right
channel. The VU meter is used to display and control the level of the R 2500 R.
This display shows an average output level.