Table of Contents
Advertisement
Special case:
Manual Network Entry
The K2 Blu automatically searches for accessible radio networks, and lists them
when you call up the menu point 'WLAN Configuration'. However, the K2 Blu can
only locate networks which broadcast their SSID network identity. For security
reasons many radio networks do not transmit the SSID (if you are not sure about
this, ask your network administrator). In such cases the network cannot be found
and displayed automatically, i.e. it must be set up manually. This is the purpose of
the menu point 'Set Manually'. If you select this menu point, you will see the input
window reproduced below; you can enter the parameters for your network at this
point.
After successfully entering all the data, please select the point 'Save WLAN
Settings', and confirm by pressing the
the data you have entered relating to the WLAN network, and moves on to the
subordinate menu in which you can set the remaining network parameters, as
described earlier in the section entitled 'Setting the Parameters for a Wired
Network'.
You can now leave the Configuration menu by selecting the menu point 'Save
and restart'.
button. Your K2 Blu now accepts
69
Advertisement
Table of Contents
