Table of Contents
Advertisement
Film mode
Deep Colour
CEC support
Leaving the category
42
This setting allows you to define whether your display device is capable of pro-
cessing film material directly at 24 frames per second.
Cinema films are usually recorded at a speed of 24 frames per second, and
many movies are also present on Blu-ray discs in this format. However, not all
display devices can process this format directly. It is important that you select
the correct setting for your display device:
On:
Your display device is connected via HDMI, and can process film
material directly in the 24 fps (frames per second) format.
Off:
Your display device cannot directly process film material in the 24
fps (frames per second) format (e.g. conversion to 25 / 30 fps or 50 /
60 fps is required).
Selecting an incorrect setting may result in no picture on your display device!
The setting selected here is only effective:
if the resolution is set to 1080p / HDMI auto,
-
and
if the film material was recorded at 24 fps.
-
This setting enables you to decide whether the picture to be transferred via the
HDMI output features expanded colour range (Deep Colour). The expanded
colour range allows for finer graduations in the colours to be displayed, which
in turn permits higher contrast values and better colour blends.
Please select the appropriate setting to suit your display device:
On:
your display device is connected via HDMI and is capable of
processing Deep Colour.
Off:
your display device cannot process Deep Colour.
The CEC function enables your TV set's remote control handset to operate the
basic functions of the K2 Blu's disc mechanism.
If you wish to make use of this function, please ensure that the TV set
connected to the system supports the CEC function.
It is not possible to guarantee that the system works perfectly with all TV sets,
since manufacturers' implementations of the CEC function vary.
If you find that the system malfunctions due to incompatibility problems, we
recommend that you switch this function off.
When you have entered all the correct settings in the category, you can leave it
by pressing the button.
Advertisement
Table of Contents
