Table of Contents
Advertisement
Display elements / Remote control receiver
Remote control
receiver
Status LED
Display
6
(below the screen)
When using the remote control system please point the FM100 handset in the
direction of the receiver.
The line of sight between the FM100 and the remote control receiver in the
K2 Blu must not be interrupted by any obstacles. Installing the K2 Blu behind
the glass doors of a cabinet will also adversely affect the remote control
system. It is essential to prevent potentially interfering light (from fluorescent
lamps and energy-saving bulbs) falling directly on the receiver, as this may
markedly reduce the effective range of the remote control system.
The Status LED glows in different colours to indicate various operating states.
These are as follows:
LED colour
State
off
Stand-by
red
Comfort stand-by
blue
Comfort stand-by
white
Switched on
green
Switched off
The graphic screen of the K2 Blu displays all information regarding the status
of the machine, the music track currently being played and the radio station
currently tuned. The display is context-sensitive and varies according to the
capabilities and facilities of the service or medium to which you are currently
listening.
The most important information is highlighted on the screen in a context-
sensitive manner. Supplementary information is displayed above and below the
main text, or by means of symbols. The symbols used are listed and explained
in the table below.
The screen can display the time of day in 'Comfort Standby' mode, and is
dimmable (variable brightness); it can therefore be adjusted to suit your
personal preference and requirements. (see chapter 'System settings
(System configuration menu)')
The displays and symbols which appear on the screen vary according to the
currently active function (SCL, Disc, etc.) and the type of music currently being
played.
The basic areas of the screen:
• Display field (a) shows information relating to the piece of music being
played. The essential information is displayed enlarged in the main line.
• Display field (b) shows information relating to the device / network / state of
reception.
• The bottom line (c) displays supplementary context-sensitive information and
operating notes:
The K2 Blu provides different screen displays for the Streaming Client and the
radio.
Large-format display:
•
Enlarged display of the most important information, clearly legible even from
a distance
Detail display:
•
Small-text display showing a large number of additional information points,
e.g. bit-rate etc.
A long press on the button on the remote control handset is used to
switch between the display modes.
Note
Alarm timer operation possible
Clock display and on / off switching
possible using the FD 100
Alarm timer is programmed
Flashes when the machine has been
switched on by the alarm timer
Only in two-room operation when
loudspeakers B are switched on
e.g.
Advertisement
Table of Contents
