Table of Contents
Advertisement
Connecting the radio aerial
Pairing the FD 100
72
FD 100 Radio Remote Control
The K2 Blu is prepared for use with the FD 100 bi-directional radio control
handset. The FD 100 features an integral full-colour screen which provides a
convenient means of controlling virtually all the K2 Blu functions, even when
there is no direct line-of-sight contact with it. The handset can also display
information relating to the selected source or the medium currently playing.
Since the FD 100 operates by a radio link, an aerial must be connected to the
K2 Blu This is plugged into the socket on the K2 Blu marked 'Remote ANT'.
The aerial should be free-standing in order to obtain maximum effective range.
Please use one of the WLAN aerials supplied in the set; the aerials are
identical. If you do not wish to use the FD 100, there is no need to connect
a remote aerial.
Before the K2 Blu can be controlled using the FD 100, the remote control
handset must first be registered to the K2 Blu. This process is known as
pairing, and only has to be carried out once. The procedure is as follows:
Press the button on the K2 Blu to call up the Configuration
•
menu, then select the 'FD 100 pairing' menu point using the
button.
To confirm the pairing process of the FD 100, press the button
•
until the menu entry changes to 'waiting for FD 100'. (the function
remains active for thirty seconds).
Locate the button on the FD 100 and hold it pressed in to
•
open the FD 100's System Settings menu.
Now select the 'Start pairing' point, and press the button: the
•
remote control handset automatically seeks the K2 Blu.
Once the device is found, you will see in the display header the on-
•
screen message 'Pairing successful'. At the same time changes the
menu entry of the K2 Blu to 'Done'. If you wish, you can change the
name of the device at this point (eg. 'Living room').
Confirm the name with the button.
•
For faster access the K2 Blu can also be assigned to a Hotkey; this is
•
the next step (see FD 100 operating instructions).
Select one - or optionally none - of the 'F' buttons, and confirm your
•
choice by pressing the button.
• The FD 100 is now paired with the K2 Blu, and is ready
For detailed information on using the FD 100 please refer to the operating
instructions supplied with the remote control handset.
Advertisement
Table of Contents
