Table of Contents
Advertisement
Picture:
No picture from the Blu-ray
player.
No picture from the iPod.
78
Cause 1:
HDMI lead not connected, or defective.
Remedy:
Connect the HDMI lead properly; have the lead checked by an expert.
Cause 2:
Video monitor not set to the correct picture input, or an incorrect video norm
selected for the input.
Remedy:
Select the picture input (AV input) on the video monitor to which your K2 Blu is
connected.
Cause 3:
One of the disc mechanism's picture settings (e.g. Resolution in the 'Display'
menu) is set to 'Auto'. Many TV sets prefer a fixed setting.
Remedy:
If possible, select fixed settings in the 'Display' menu. You may need to read
the operating instructions supplied with your television in order to establish the
correct values.
Cause 1:
Video output switched off at the iPod.
Remedy:
Switch on video output on your iPod.
Cause 2:
A standard analogue video lead (CVBS) is not connected between the K2 Blu
and the video monitor.
Remedy:
The iPod only generates video signals in standard video form (CVBS). If you
use the digital HDMI output for DVD /Blu-ray playback, an FBAS video lead
must be connected between the K2 Blu and the video monitor in addition to the
HDMI lead.
Switch your iPod's video output on, and select the video input on your monitor
to which the CVBS output of the K2 Blu is connected.
Cause 3:
Your iPod does not support video output.
Remedy:
Ensure that you are using a model of iPod which supports video output.
Advertisement
Table of Contents
